Service manual

Avantra 36/44 Service Manual
3-30 Diagnostics
DEC (Image/Focus/Bridge)
* System dependent
NOTE: The above values may be different depending on the revi-
sion of the software loaded into your system. Refer to the
CSB (Customer Service Bulletin) for the current values for
that version of software.
Parameter
Value Parameter Value Parameter
Value
BOL Offset.......... * Polarizer Home.... * Brdg Max. Torque 250
Carriage Home..... * Focus Position..... * Buffer Med Spd..... 11421
PWM @1200....... * Focus Steps/Mil... 22 Bridge On Delay.... 1
PWM @1800....... * Focus Motor Rate 15300 Ubr FastSp Thin... 4500
PWM @2400....... * Polarizer Rate...... 1600 Ubr SlowSp Thin.. 6500
PWM @3600....... * Spot Motor Rate... 4500 Lbr SlowSp Thin... 62
Magnification....... * Beam Comp Rate 1600 Lbr SlCurr Thin.... 70
Linearity............. * Beam Comp Offse * BrOffElyTimThin 90
SlowScan MAG... * Ubr FastSp Thick... 5500
SlowScan PHASE 0 Ubr SlowSp Thick 5500
SlowScan CONST 0 Lbr SlowSp Thick 62
Lbr SlCurr Thick... 70
BrOffElyTimThick 20
Vacuum Control... 1 Film Brush Ctrl... 4
1st Ramp Steplgth 100 Paper Brush Ctrl... 22
1st Ramp Spd...... Plate Brush Ctrl... 22