Service manual

Avantra 36/44 Service Manual

3-20 Diagnostics

3.3.3.1 User Interface

The top bar menu contains the following groups of sub-menus:

• TEST

• ALIGN

• UTILITIES

• FLASHROM

• EXIT

Test Menu

Test menu items are:

• Selectable Tests

• Download CMD File

• Functions

Selectable Tests

Displays a dialog box with the following tests:

Inside the module menu, choose All Tests or a single test. The test module allows

the user to loop on a test in certain modes. The test modes are:

• Single Pass–runs test only once, displaying pass/fail error code.

• Continuous–runs tests the number of cycles entered, ignoring errors.

• Halt@Error –runs tests the number of cycles entered, stopping if an error

occurs.

Test Function

DEC. Tests DEC. - K4 Module Test

DAC. Ramps Ramps cycles for O-Scope Monitoring

Carriage Tests Carriage Movement Tests

Media Tests Media Motor Tests

OCP Tests OCP Module Tests

Boot Tests Boot Sequence Tests

Bridge Tests Bridge/Buffer Tests

Open Log File Save all Diagnostic output to a Logﬁle

Close Log File Close the Logﬁle