User manual OPTIMA 104
AgfaPhoto OPTIMA 104 Table of Contents Preface ....................................................................................................3 About this Manual ..............................................................................3 Safety and Handling Precautions..........................................................3 Disposal of Waste Equipment by Users in Private Households in the European Union .................................................................................
AgfaPhoto OPTIMA 104 Setting Flash.................................................................................... 37 Setting Drive Mode ........................................................................... 37 Setting Focus Mode .......................................................................... 37 Setting Color Mode ........................................................................... 37 Setting the Digital Zoom ...................................................................
AgfaPhoto OPTIMA 104 Preface About this Manual This manual is designed to assist you in using your new digital camera. All information presented is as accurate as possible but is subject to change without notice. Copyright This manual contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer.
AgfaPhoto OPTIMA 104 Battery Information • Turn off the camera before installing or removing the battery. • Use only the provided batteries or type of battery and charger that came with your camera. Using other types of battery or charger may damage the equipment and invalidate the warranty. • When the camera is used for an extended period of time, it is normal for the camera body to feel warm.
AgfaPhoto OPTIMA 104 Introduction Congratulations on your purchase of the new digital camera. Capturing high-quality digital images is fast and easy with this state-of-the-art smart camera. System Requirements In order to get the most out of your camera, your computer must meet the following system requirements: For Windows: • Windows 2000/XP/Vista/Win7 • Processor: Pentium II 450MHz or above • Memory: 512MB or above • HDD space: 200 MB or above • 16bit color display monitor • Microsoft DirectX 9.
AgfaPhoto OPTIMA 104 Package Contents Please check the contents of your camera package.
AgfaPhoto OPTIMA 104 Camera Views Front View 1. 2. 3. 4. Flash Self-timer LED/ AF Assist Lamp Lens Microphone 5. 6. 7. LCD Screen LED indicator Playback button 8. 9. 10. Stabilizer button Zoom dial Shutter button 11.
AgfaPhoto OPTIMA 104 Bottom View 12. 13. Battery/Memory compartment USB/TV Out 14. 15. Speaker Tripod screw hole 16. Strap ring Left/Right View Camera Buttons Your camera is equipped with different buttons for ease of use. Button Description Power Press the Power button to turn the power on/off. Stabilizer The stabilizer sets the optimal ISO value according to light levels to compensate for camera shake. Press to set stabilizer on/off.
AgfaPhoto OPTIMA 104 Onscreen Touch Buttons The control buttons appear on the touch screen and change dynamically depending on the task you’re performing. Touch Button Icon Description Record mode Tap to launch the scene mode menu. Flash Tap to popup the Flash menu. Self-timer/Burst Tap to popup the self-timer/burst menu. Macro Tap to popup the macro menu. AF area/ Face tracking Tap to popup the AF area/Face tracking menu. Menu Tap to launch record menu.
AgfaPhoto OPTIMA 104 Getting Started Attach the Camera Strap Inserting the Battery Follow these instructions to insert the rechargeable battery into the battery/memory card compartment. Please read "Battery Information" on page 4 before inserting/removing batteries. 1. Make sure the power is off before inserting the battery. 2. Unlock and open the Battery/memory card compartment at the bottom of the camera. 3.
AgfaPhoto OPTIMA 104 Inserting an SD/SDHC Memory Card Expand your camera’s storage by using SD or SDHC memory cards. 1. Unlock and open the Battery/memory card compartment at the bottom of the camera. 2. Insert the SD/SDHC card into the memory card slot with the metallic part facing the front side of the camera. 3. Push the SD/SDHC card into the memory slot until it clicks into place. 4. Close and lock the Battery/memory card compartment. To remove the SD/SDHC card 1.
AgfaPhoto OPTIMA 104 Initial Settings When you turn on your camera for the first time, you will be asked to do the initial settings of your camera. First is the setup of language menu. Secondly, setup the Date and Time. Setting the Language Specify in which language menus and messages are to be displayed on the LCD monitor. or to turn pages. 1. Tap to apply. 2. Tap Setting the Date & Time 1. Tap the screen to select Year/Month/Date or Hour/Minute. or to change the value for the date and time. 2.
AgfaPhoto OPTIMA 104 Using the Touch Screen The touch screen shows all important information regarding camera settings as well as the visual image of your image or video. It also provides all kinds of touch buttons to control the settings for the camera. The display on the touch screen is called the On Screen Display or OSD. Touch screen Layout Photo Mode Screen Layout No Item Description 1 AF lamp Indicates AF lamp is enabled. 2 Focus area Use to frame subject to capture.
AgfaPhoto OPTIMA 104 19 ISO Displays ISO settings. 20 Shutter speed Displays shutter speed settings. 21 Aperture value Displays aperture settings. 22 Touch button - Menu Tap to launch record menu 23 Touch button - Macro Tap to display the macro popup menu. 24 Touch button Self-timer/Burst Tap to display the self-timer/burst popup menu. 25 AEB Indicates AEB function is enabled 26 Touch button - Flash Tap to popup the flash menu.
AgfaPhoto OPTIMA 104 Scene Mode - Movie Mode Screen Layout Standby layout No Recording Layout Item Description 1 Touch button - Record mode Tap to launch the scene mode menu. 2 Zoom indicator Displays zoom. 3 Time remaining Indicates the remaining time of video available. 4 Battery Indicates battery level. 5 Storage media Indicates current storage media in use. 6 Touch button - Display Tap to switch the display mode of the LCD monitor.
AgfaPhoto OPTIMA 104 Playback Mode Screen Layout The Playback mode display varies depending on the type of image being viewed. Playback mode display of still images No Item Description 1 File no./Total no. Indicates the file number over the total number of files in the storage card. 2 Battery Indicates battery level. 3 Storage media Indicates used storage memory. 4 Touch button - Next file Tap to view the next file.
AgfaPhoto OPTIMA 104 Playback mode of videos Playback layout No Playing Layout Item Description 1 File no./Total no. Indicates the file number over the total number of files in the storage card. 2 Battery Indicates battery level. 3 Storage media Indicates used storage memory. 4 Touch button - Next file Tap to view the next file. 5 Touch button - Play Tap to play the video clip. 6 Touch button - Display Tap to switch the display mode of the LCD monitor.
AgfaPhoto OPTIMA 104 Playback mode of audio clips Playback layout No Playing Layout Item Description 1 File no./Total no. Indicates the file number over the total number of files in the storage card. 2 Battery Indicates battery level. 3 Storage media Indicates used storage memory. 4 Touch button - Next file Tap to view the next file. 5 Touch button - Play Tap to play the audio clip. 6 Touch button - Display Tap to switch the display mode of the LCD monitor.
AgfaPhoto OPTIMA 104 Changing the LCD Monitor Display The type of information displayed on the LCD monitor can be changed taping the onscreen display button. Tap the button repeatedly to change the LCD display from one type to another. In Photo/Movie Mode, the LCD display can be changed into any of the following: • Basic • Full • None • Guideline • The OSD information may vary depending on the record mode type.
AgfaPhoto OPTIMA 104 Using the Stabilizer The Stabilizer function works according to the luminance of the target object. This function uses special image data processing for getting high sensitivity of CCD. High sensitivity can use higher shutter speed compared with normal mode, so it reduces influence of hand shaking. Press the stabilizer button before pressing the shutter button. Stabilizer button To activate Stabilizer • Press the Stabilizer button on top of your camera to enable/disable stabilizer.
AgfaPhoto OPTIMA 104 Using Flash When taking pictures in difficult lighting conditions, use the onscreen Flash button to get correct exposure. This function cannot be activated in recording videos or continuous shooting. To activate Flash: • Tap the onscreen Flash button to display the popup flash menu and tap desired flash mode icon. Your camera is equipped with five flash modes: Icon Item Description Auto Flash The flash fires automatically whenever extra lighting is needed.
AgfaPhoto OPTIMA 104 Your camera supports the four focus modes: Icon Item Description Auto Focus With Auto Focus, the focus range starts from 0.12m. Macro This mode is designed for close-up photography. If Macro is enabled, you can capture the detail and sharpness of a very close image by fixed focus. Pan Focus The function of auto focus finds the best proper position from 9 blocks of focus area. Infinity When Infinity is set, the camera focuses on distant objects.
AgfaPhoto OPTIMA 104 Setting the AF Area/Face tracking/Touch Shot AF stands for Automatic Focus. This feature determines the area on which the camera focuses. To set AF Area: • Tap the onscreen AF Area button to display the popup AF Area menu and tap the desired icon. How to use Face tracking: 1. Tap the onscreen AF Area button and then choose . Face tracking 2. Frame the target(s), when a face is detected, a white focus box appears on the screen and tracks the face continuously. 3.
AgfaPhoto OPTIMA 104 Using the Record Menu The Record menu allows you to change modes, and setup other capture settings. Record Menu To go to Record Menu: 1. Tap the onscreen MENU button to launch the Record Menu. or to turn pages. 2. Tap 3. Tap the desired option button to enter submenu. 4. Configure the settings in the submenu. button to save and apply 5. Tap the onscreen changed settings. button or button to exit the menu 6. Tap the or return main menu anytime.
AgfaPhoto OPTIMA 104 Icon Item Description Auto The simplest way to shoot basic images. Settings are adjusted automatically. Movie This mode is used to record movie clips. Program The camera automatically adjusts suitable shooting settings like shutter speed and aperture values. Intelligent Scene The camera detects the shooting conditions and automatically switches to the appropriate scene mode. Portrait The camera blurs the background to focus on the subject.
AgfaPhoto OPTIMA 104 Text This feature enhances the black and white contrast normally used when capturing text images. Foliage This feature boosts the saturation of greens to give a rich colour to foliage. Auction This feature combines up to 4 shots into a single image and provides 4 patterns to select for usage of auction. Smile Capture This feature uses face tracking to auto detect faces to capture. When smiles are detected, it continuously captures the image.
AgfaPhoto OPTIMA 104 Using Intelligent Scene This feature is most useful for novice users to capture great images even without basic knowledge of photography. Simply frame the shot with the help of Intelligent Scene Mode, the camera automatically recognizes 11 kinds of scenes - Portrait, Landscape, Sunset, Macro, Text, Snow, Backlight, Backlight Portrait, Night Scene, Night Portrait and Foliage - and selects the ideal settings. Intelligent scene icon.
AgfaPhoto OPTIMA 104 Using Sports Mode When you need a series of sports motion images, such as a golf swing, or try to capture the images of a flying hummingbird/butterfly, be sure to switch the scene mode to sports mode. This mode provides shutter in burst speed (Keep shooting images long as the shutter button is pressed) which allows you to capture a sequence of pictures that are frames apart clearly. Make sure you have plenty of memory in your memory card as you will need it when you start shooting.
AgfaPhoto OPTIMA 104 4. Frame the subject and press the Shutter button to take the first shot. to reset 5. Or, tap the onscreen Auction button pattern. 6. Tap Continue button to proceed the second shot. 7. Or, tap Cancel button to go back the first shot. 8. Repeat step 4 to 6, until the pattern is filled in images. 9. Tap Save button to save the composed image. 10. Or, tap Cancel button to go back last shot. 11.
AgfaPhoto OPTIMA 104 Using Smile Capture Mode When facing camera, especially kids, smiles are always short and hard to seize by manual shutter. Smile capture mode detects every smile all the time and performs Automatic Focus (AF) to capture an image without pressing shutter button. Follow the instructions to get a Happy image by Smile Capture Mode: 1. Select Smile capture mode from Scene Mode menu. 2. Focus the camera on the subject to capture. 3.
AgfaPhoto OPTIMA 104 3. Ask someone else to record a shot of you against your original pre-composed background, telling him/her to compose the image by using the semi-transparent screen image as a guide. 4. Move your position until photographer confirms your whole or half body in the frame and in the right place. 5. Press the shutter button. Camera stores the image produced by this step only.
AgfaPhoto OPTIMA 104 Using Voices REC 1. From the Scene Mode menu, select Voice. The Voices REC screen layout is displayed on the LCD monitor. 2. Press the Shutter button to start recording. 3. Press the Shutter button again to stop recording. Setting Photo Size The Photo Size function is used to set the resolution before you capture the image. Changing the Photo Size affects the number of images that can be stored in your memory card. The higher the resolution, the more memory space is required.
AgfaPhoto OPTIMA 104 Setting EV Compensation Images can be captured with the overall scene intentionally made brighter or darker. These settings are used when a suitable brightness (exposure) cannot otherwise be obtained in circumstances where the difference in brightness between the subject and the background (the contrast) is large, or when the subject that you wish to capture is very small within the scene. Available for still images only.
AgfaPhoto OPTIMA 104 If the Stabilizer is enabled, ISO is automatically set to Auto and cannot be adjusted. To adjust ISO disable Stabilizer first. Setting Metering This sets the metering method for calculating the exposure. Icon Item Description Multi The entire area of the screen is measured, and the exposure is calculated. Center Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center.
AgfaPhoto OPTIMA 104 Setting AF area To set AF Area: 1. From the Record menu, tap AF Area. 2. Tap the desired option button to apply. For more information, please refer to "Setting the AF Area/Face tracking/Touch Shot" on page 23. Setting AF Lamp The AF Lamp function allows you to record images even low light conditions.
AgfaPhoto OPTIMA 104 Setting Saturation The Saturation function lets you adjust the color saturation in your images. Use a higher saturation setting for rich colors and a lower saturation setting for more natural tones. To set Saturation 1. From the Record menu, tap Saturation. 2. Tap the desired option button to apply. The table below shows the available Saturation settings. Icon Item Description High Enhance the saturation. Normal Normal saturation. Low Reduce the saturation.
AgfaPhoto OPTIMA 104 Setting Flash To set Flash: 1. From the Record menu, tap Flash. 2. Tap the desired option button to apply. For more information, please refer to "Using Flash" on page 21. Setting Drive Mode To set Drive mode: 1. From the Record menu, tap Drive Mode. 2. Tap the desired option button to apply. For more information, please refer to "Setting the Drive Mode" on page 22. Setting Focus Mode To set Focus mode: 1. From the Record menu, tap Focus Mode. 2.
AgfaPhoto OPTIMA 104 Setting the Digital Zoom This feature controls the digital zoom mode of your camera. Your camera enlarges an image using the optical zoom first. When the zoom scale exceeds 4x, the camera uses digital zoom. To set Digital Zoom 1. From the Record menu, tap Digital Zoom. 2. Tap the desired option button to apply. The table below shows the available Digital Zoom settings. Icon Item Description Intelligent Zoom Enlarges the image digitally with almost no distortion.
AgfaPhoto OPTIMA 104 Setting Auto Review The Auto Review function lets you view the captured image right after shooting it. If Auto review is enabled, the camera will display the captured image for 1 second in the LCD monitor. To set Auto Review 1. From the Record menu, tap Auto Review. 2. Tap On/Off to enable/disable Auto review. Recording Videos You can record videos with the camera; the available recording time depends on the capacity of the memory card.
AgfaPhoto OPTIMA 104 The table below shows the available size and corresponding image quality settings. Icon Item Description 1280 x720 1280 x 720 HDTV (Only support SDHC_Class(6)) The length of a single video recording is up to 29 minutes. It will automatically stop recording if time is over. 640 X 480 High Quality 320 x 240 Normal Web For Internet, see "Internet Mode" on page 40 below.
AgfaPhoto OPTIMA 104 Playback You can playback the still images, videos and audio clips on the LCD monitor. File Navigation There are 4 playback modes for file navigation in this camera: • Single navigation • Photo Steam • Thumbnail • Calendar Viewing in Single Navigation Mode The single navigation mode displays the image one by one on the LCD monitor. To view images/videos/audio clips, follow the steps below: 1. Press the Playback button on the camera. 2. The LCD monitor displays an image.
AgfaPhoto OPTIMA 104 The table below shows the function of onscreen application buttons in photo stream mode. Icon Item Description Delete Tap to popup delete confirmation. For more information, please refer to "Delete" on page 51. Search Photos Tap to launch photo search menu. For more information, please refer to "Search Photos" on page 45. Favorite Tap to launch add-to-favorite menu. For more information, please refer to "Favorite" on page 47.
AgfaPhoto OPTIMA 104 Thumbnail icons: In playback mode some images may contain icons. These icons indicate the type of file or recording. Icon Type Description Voice Record Indicates a voice recording file. File Error Indicates an error file. Zooming images The zoom view function works with still images only. • In single navigation mode, spin the Zoom dial clockwise (right) repeatedly until the desired zoom view. • The 4 arrows on the LCD monitor indicate that the image is zoomed in.
AgfaPhoto OPTIMA 104 Playing Videos 1. Set the camera to Playback mode . 2. Tap the onscreen Play button to play a video clip. 3. During playback, tap the or button on the control panel to fast forward or rewind the video. The camera supports forward and rewind speed of 4x. button to pause playback; tap the 4. Tap the button to resume or save a screen shot by tapping button. the 5. To forward or rewind the video frame by frame, tap button to pause playback, then tap the or the buttons.
AgfaPhoto OPTIMA 104 Volume Control This feature controls the audio volume only when a video, voice recording or voice memo is playing back. To set volume control: button to popup the 1. During playback, tap the volume bar. 2. Slide your finger vertically on it to adjust the volume. 3. Or, use Zoom dial to control volume. Spin zoom in/out to increase/decrease volume. Volume level: 0~10 Playback Menu The Playback menu allows you to edit images, record voice memo, and setup playback settings.
AgfaPhoto OPTIMA 104 • Search by Favorite: Favorite groups list in order of: . Please refer to "Favorite" on page 47. To know about how to add files into these groups. Tap the group button to display all files of the group in single navigation mode. • Search by Scene: Tap the group button to display all files of the scene in single navigation mode. • Search by Date: All date groups will be listed in captured order. Tap the group button to display all files of the scene in single navigation mode.
AgfaPhoto OPTIMA 104 To configure slide show settings: 1. Tap to select Interval settings: 1 sec., 3 sec., 5 sec., and 10 sec. 2. Tap to select Transition settings: . 3. Tap to select Repeat setting. Available settings are: Yes, No. Favorite Arrange your files by sorting them to the built-in 10 favorite groups. The feature makes it easier to locate the desired image/video/voice recording among numerous files with the function "Search Photos". To add/remove files to Favorite groups: 1.
AgfaPhoto OPTIMA 104 Perspective Control You may have noticed that buildings look as though they are thinner at the top when you shoot from a low viewpoint, also a road disappearing into the distance. All these are result of perspective distortion and all affected by the angle of view and focusing point. Perspective Control allows you to make areas thicker or narrower to correct these distortions. To use Perspective Control: 1.
AgfaPhoto OPTIMA 104 Color Mode The Color Mode function lets you adjust edit still images to apply different colors or tones for a more artistic effect. Edited images in this function are saved as a new file. To set Color Mode for an image: 1. Set the camera to Playback mode and locate the desired image by single navigation. 2. Tap the onscreen Menu button to launch playback menu and tap Color Mode. or button to select a color level on 3. Tap the the image.
AgfaPhoto OPTIMA 104 How to use the painter tools: Use the Pan: Tap ‧ or ■ to set stroke size or color. Use the stamp: Tap ★ or ■ to set stamp style or color. Use the eraser: Tap‧to set eraser size. Use the image frame: Tap ٨ or ٧ to select image frame. Undo Tap to undo last operation. Save Tap to save the image as a new image. X Exit Tap to exit without saving. Reset Rest all painter’s operation; wipe the screen. For greater performance, the camera only allows undo the operation one time.
AgfaPhoto OPTIMA 104 Delete The Delete function allows to remove unwanted files in the internal memory or on the memory card. Protected files cannot be erased, to delete, unprotect the file first. See "Protect" on page 52. To delete a image/video/audio clip: 1. Set the camera to Playback mode and locate the desired image by single navigation or photo stream mode. 2. Tap the onscreen Menu button to launch playback menu and tap Delete. button from photo steam mode.
AgfaPhoto OPTIMA 104 To delete all files: 1. Tap the All button in the delete submenu to popup a confirm menu. 2. Tap YES to delete all files in the memory, Cancel to abort. Protect Set the data to read-only to prevent images from being erased by mistake. A protected file has a lock icon when viewed in Playback mode. To protect files: 1. From the Playback menu, tap to select Protect. 2. The Protect submenu is displayed on the LCD monitor. Available settings are as follow: • Single.
AgfaPhoto OPTIMA 104 To unlock all files: 1. Tap Unlock all in the protect submenu to popup a confirm menu. 2. Tap Yes to unlock all files, Cancel to abort Trim The Trim function allows you to trim an image to another image size. This function is only available for still images. To trim an image: 1. Set the camera to Playback mode and locate the desired image by single navigation mode. 2. Tap the onscreen Menu button to launch playback menu and tap Trim. 3.
AgfaPhoto OPTIMA 104 Resize Resizes a previously saved image and only resizing to a smaller size is available. To resize an image: 1. Set the camera to Playback mode and locate the desired image by single navigation mode. 2. Tap the onscreen Menu button to launch playback menu and tap Resize. 3. Tap to select a resize option button. Available sizes: 8M/3M/5M/VGA. 4. The camera saved the resized image as a new one and return single navigation mode.
AgfaPhoto OPTIMA 104 DPOF DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on your memory card. You can select the images to be printed and how many prints to make with the DPOF menu in the camera and insert the memory card to the card compatible printer. When the printer starts printing, it will read the embedded information on the memory card and print the specified images. To set DPOF: 1.
AgfaPhoto OPTIMA 104 Using the Setup Menu You can access the Setup menu whether you are in Record or Playback mode. The Setup menu allows you to configure general camera settings. To go to Setup Menu: 1. Tap the onscreen Menu button to launch the Record/Playback Menu. to launch Setup menu. 2. Tap the tab button 3. Tap or to turn pages. 4. Tap the desired option button to enter submenu. 5. Configure the settings in the submenu. button to save and apply 6. Tap the onscreen changed settings. 7.
AgfaPhoto OPTIMA 104 Setting LCD Save Enable the LCD Save function to automatically decrease the LCD brightness to conserve battery power. When the camera is idle for 20 seconds, the LCD darkens. Press any button to resume to normal brightness. • The camera is idle when no buttons are pressed. LCD Save, though enabled, does not function during video playback, slideshow and video recording. Setting Date & Time Use the Date & Time function to set the date and time of your camera.
AgfaPhoto OPTIMA 104 Setting LCD Brightness Select a brightness level for the LCD monitor. Available settings are: • Bright • Normal Setting Memory Kit This utility formats the internal memory (or memory card) and erases all stored images and data. Available settings are: • Format. Tap to format currently used memory. • Copy to Card. Tap to copy all files stored in the internal memory to the memory card.
AgfaPhoto OPTIMA 104 Making Connections You can connect your camera to: TV, computer, or a printer. Connecting the Camera to a TV You can play back your images on a TV screen. Before connecting to any video devices, make sure to select NTSC/PAL to match the broadcast standard of the video equipment you are going to connect to the camera. To connect your camera to a TV: 1. Turn on the camera. 2. Set the TV out to match the TV’s video out format. See "Setting TV Out" on page 57. 3.
AgfaPhoto OPTIMA 104 5. The PC starts to detect the connection while the LCD monitor appears "Connecting…". 6. Connection established after "PC MODE" appeared on the LCD monitor 7. Access the files in the camera by your PC. • The camera’s internal memory and memory card would display as removable drives in PC. • After the connection, no image is displayed on the LCD monitor. Connecting the Camera to a Printer You can print your images directly using a PictBridge compatible printer. 1.
AgfaPhoto OPTIMA 104 Setting the Print Mode Menu Print Mode menu appears on the screen after the connection between a printer and your camera is established. Print Mode includes three major settings: • Select. An image can then be selected to print. • All. Prints all images. • Index. Prints all images as thumbnails. To set Print Select 1. Tap the or button to scroll and select an image for printing. 2. Specify the number of copies. Tap or to increase/decrease the number. 3.
AgfaPhoto OPTIMA 104 Appendix About Folder and File Names Your camera automatically creates specific directory of folder in the internal memory cards to organize captured images, videos and audio files. File Naming File names begin with "DSCI" and followed by a 4-digit number that increases in sequence. File numbering starts from 0001 when a new folder is created.
AgfaPhoto OPTIMA 104 Specifications Sensor Lens LCD monitor Focusing Range Aperture Shutter File Format Resolution (Photo) SHARP 12M 1/2.3" Focal Length: 5.05 (W) ~ 20.2 (T) mm 4X optical zoom, 5x digital zoom 3.0" LCD Panel Wide: 12cm ~ infinity Tele: 70cm ~ infinity F 2.8 ~ 6.3 Type: Mechanical and Electronic Shutter Speed: Auto: 1 - 1/2,000 sec. Night: 15 - 1/2,000 sec. Fireworks: 2 sec. Still Image: EXIF 2.
AgfaPhoto OPTIMA 104 OSD Language English/French/Spanish/German/Italian/Russian/Portuguese/Brazil Portuguese/Dutch/Turkish/Polish/Hungarian/Romanian/Czech/Bulgarian/Croati an/Slovak/Slovenian/Greek/Swedish/Norwegian/Finnish/Danish/Arabic/Indones ia/Malay/Thai/Japanese/Korean/S. Chinese/T.
AgfaPhoto is used under license of Agfa-Gevaert NV & Co. KG or Agfa-Gevaert NV. Neither Agfa-Gevaert NV & Co. KG nor Agfa-Gevaert NV manufacture this product or provide any product warranty or support. For service, support and warranty information, contact the distributor or manufacturer. For service, support and warranty information, contact the distributor or manufacturer. All other brands and product names are registered trademarks of their respective owners.
