Operation Manual

(1) ( ) in DVD source Load /Eject DVD disk.
(2) ( ) Press to play the disc under DVD mode.
(3) (MENU) Press this button to disp ay the OSD menu When the OSD menu is on,
press this button to exit the menu.
(4) (CH- ) Press the button to down the channel.
(5) (CH+) Press the button to up the channel.
(6) (VOL- ) Press Volume- to decrease the volume.
(7) (VOL+) Press Volume+ to increase the volume.
(8) (INPUT) Press this button to select AV source or TV source.
(9) ( ) Press this button to standby mode.
(10) (Receiver) Infrared remote control, OSD (on-screen display) window.
(11) (Indicator) LED Standby/Power indicator.
(12) (DVD Slot) Insert DVD Disc.
12
13
Main Power
Switch
INTRODUCTION
CONTROLS
This manual explains the features available on the model of LC 19010 DVD.
■ This is a simplified illustration of a front panel.
This illustration might somehow differ from your TV.
Control Panel
(01) USB input: Connect USB Device input.
(02) HDMI input: Connect HDMI signal
(03) CARD READER input: Connect CARD READER Device input.
(04) PC VGA input: Connect PC VGA signal output
(05) SCART Connector (Input : CVBS, RGB and Audio, Output : TV audio and video)
(06) S-video input: Connect S-video output of your AV device
(07) YPbPr Video input: Connect the component image output of your AV devices here
(08) EARPHONE output: Connect to headphone
(09) PC Audio input: Connect PC audio input
(10) Audio input: connect to S-video/YPbPr AUDIO input
(11) RF: Antenna nput (75 ohm)
(12) COAX: DVD Digital audio out.
(13) DC12V 5A input Jack
Note: Please study the operation manuals of external equipment before
connecting them to the television.
Please turn off the TV before connecting other equipment.
INTRODUCTION
CONNECTION OPTION
Side Connection Panel
■ This is a simplified illustration of a side panel.
This illustration might somehow differ from your TV.
7