User guide

2. Select Date and Time.
3. Switch to the Server Internet Time tab.
4. In the list, type or select the time server to synchronize with.
Synchronizing with a time server when the IMPAX computer is a member
of a domain
To ensure that image data streaming operates correctly when the IMPAX computer is a member of a
domain, use the synchronization feature built into the operating system.
To synchronize with a time server when the IMPAX computer is a member of a domain
1. Open a command prompt.
2. Type
w32tm /config /syncfromflags:manual /manualpeerlist:time_server
where time_server is the DSN name or IP address of the time server. The time_server can be any
Windows- or Solaris-based server.
3. To update Windows Time Service to use the new configuration, type
w32tm /config /update
4. To synchronize the clock, type
w32tm /resync
Installing the PSARMT and cache tools on a Windows server7.
For this install, you must be logged into Windows as an administrator-level user.
The PSARMT and cache tools are on the IMPAX AS300 CD. PSARMT is used with external PACS to
mark studies as PACS archived. The cache check and repair tools detect and correct IMPAX cache
corruption.
To install the PSARMT and cache tools on a Windows server
1. Insert the IMPAX AS300 CD.
2. Navigate to the programs\mvf directory and double-click mvfcachecheck-impax_
main_buildxx.exe (cache check and repair tools).
3. On the Welcome screen, click Next.
4. On the Setup Complete screen, click Finish.
The tools are installed in the C:\mvf directory.
5. Navigate to the programs\mvf directory and double-click mvfpsarmt-impax_ main_buildxx.exe
(PSARMT Migration Tools).
6. On the Welcome screen, click Next.
7. On the Setup Complete screen, click Finish.
The tools are installed in the C:\mvf directory.
AS300 Upgrade Guide—IMPAX 6.2 or later to IMPAX 6.4 60
AGFA COMPANY CONFIDENTIAL