Manualshelf

User guide

ManualsBrandsAGFA ManualsComputer equipmentIMPAX AS300
51525354555657585960
9. Exit the Registry Editor.
10. To stop and restart the Windows Time server, at a command prompt, type net stop w32time &&
net start w32time.
It may take up to an hour for this to take effect.
For more information, refer to the Microsoft Knowledge Base article KB 816042.
Synchronizing a Windows 2003 server to an internal time source
Synchronize the Windows 2003 servers on your network to ensure that image data streaming operates
correctly. To configure the Primary Domain Controller (PDC) master without using an external time
source, change the announce flag on the PDC master. Choose either the Application Server or the AS300
server as the PDC master and synch the other servers to it.
CAUTION!
Serious problems might occur if you modify the registry incorrectly. These problems might
require that you reinstall your operation system and there is no guarantee that these problems
can be solved.We recommend that you back up the registry before you change it, so that
you can back out of the changes if necessary.
To synchronize a Windows 2003 server to an internal time source
1. To open Registry Editor, select Start > Run, type regedit, and click OK.
2. To specify if the local machine is a local time server, in the
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\AnnounceFlags
subkey, change REG_DWORD to A.
3. Exit the Registry Editor.
4. To stop and restart the Windows Time server, at a command prompt, type net stop w32time &&
net start w32time.
It may take some time for this to take effect.
Note:
The PDC master must not be configured to synchronize with itself.
Synchronizing with a time server when the IMPAX computer is not a
member of a domain
To ensure that image data streaming operates correctly when the IMPAX computer is not a member
of a domain, use the synchronization feature built into the operating system.
To synchronize with a time server when the IMPAX computer is not a member of a domain
1. Open Control Panel.
AS300 Upgrade Guide—IMPAX 6.2 or later to IMPAX 6.4 59
AGFA COMPANY CONFIDENTIAL