User guide

Deleting old log files12.
Important!
This topic applies only when upgrading an existing server.
On the server being upgraded, remove any old log files to ensure that all future log information is a
result of the migration procedure.
To delete old log files
1. On the server to be upgraded, open a command prompt.
2. Change to the C:\mvf\bin\ directory.
3. Run stopall.bat.
4. For future reference, copy all files in C:\mvf\data\logs\ to a backup location.
5. Delete all the files from C:\mvf\data\logs\.
Clearing the archive Logical Volume13.
Important!
This topic applies only when upgrading an existing server.
To avoid conflicts when upgrading, clear the archive Logical Volume. IMPAX re-creates the Logical
Volume folders and files afterward.
CAUTION!
Ensure that the Logical Volume is empty before deleting it. If it is not empty, create a store
job to archive the images in the Logical Volume.
To clear the archive Logical Volume
1. In the 6.2 or 6.3 Administration Tools, on the Setup tab, select Archive Manager.
2. Select the Logical Volume and click Close.
3. At the Close Volume prompt, click Yes.
4. Ensure that the Archive queue is halted (refer to page 13).
5. Delete the Logical Volume folder and files from the drive.
The Logical Volume folder and files are automatically re-created by IMPAX.
AS300 Upgrade Guide—IMPAX 6.2 or later to IMPAX 6.4 14
AGFA COMPANY CONFIDENTIAL