User guide

Storing unarchived studies
When no studies are returned by the Failed verification query, archive all remaining studies.
To store unarchived studies
1. In the 6.2 or 6.3 Administration Tools, on the Daily tab, click Study Manager.
2. From the location list, select Cached (or another value that will return the unarchived studies).
3. Set other search criteria to Any value (or set to appropriate values).
4. Click Refresh.
5. In the search results, select the studies to archive.
The Location column on the results list shows the current location of the study, and indicates
which studies are only in cache (C for system cache, L for local station cache, W for web cache)
and not also in an archive location (such as P for PACS archive).
6. Click Store to Archive.
7. To update the status of the selected studies, click Refresh.
8. Ensure that all studies are archived.
Note:
To store unarchived studies, you could also use the Migration Toolbox and run the
study_archive_report tool. Refer to the “Running an initial report on study archiving status”
topic in the Pre-Migration Guide—IMPAX 6.2 or later to IMPAX 6.4.
Closing and mirroring archive volumes8.
Close all open primary volumes before upgrading. Open mirror volumes are closed automatically when
a SYNC job completes successfully with the corresponding closed primary volume. Fresh volumes may
remain open as they do not contain any studies.
To close and mirror archive volumes
1. In the 6.2 or 6.3 Administration Tools, on the Setup tab, select Archive Manager.
2. Switch to the Volumes tab.
3. Select a logical volume and click Close Logical Volume.
4. If the system has a jukebox archive, you may have to wait for the sync job to finish.
If the system has a non-jukebox archive, to ensure that a backup of the data exist, perform a mirror
procedure manually.
5. On the Daily tab, select Job Manager.
AS300 Upgrade Guide—IMPAX 6.2 or later to IMPAX 6.4 12
AGFA COMPANY CONFIDENTIAL