Installation guide

IMPAX Client: Hardware requirements
(Topic number: 7793)
The following hardware configuration are intended as a guide for IMPAX 6.5.3 Clients used primarily
for viewing large volume image sets (such as 64 slice CT) and using third-party applications such as
Voxar 3D, TalkStation, Orthopaedic planning tools, and so on. These Clients are typically used
inside a hospital environment, such as a radiology reading area by radiologists. While IMPAX Client
should work on an equivalent platform, optimal results can be guaranteed only on the recommended
platform.
To use the CT-MR navigation tools, we strongly recommend that, due to the high volume of data
being manipulated, Client systems be equipped with a high-end video subsystem that is PCle X16
based.
CAUTION!
For official diagnostic interpretation, we recommend setting the display to 32-bit color or more.
RequirementsComponent
The Agfa preferred supplier is HP.System
HP xw4400, xw4600, xw6400, xw6600, z400, or z600
Dell Precision™ 490 or 690, T5400, T7400, or T7500
2 x 2.0GHz or higherCPU
1 x Dual/Quad Core 2.8GHz or higher
1 x Intel® Pentium® M 1.5GHz (Tablet PC – Non-diagnostic)
Windows XP: 1 GB minimumRAM
Windows Vista and Windows 7: 4 GB minimum
8 GB recommended for all new systems for optimal performance and
viewing of large volume image sets
4 GB recommended for IMPAX Clinical Applications such as IMPAX
Virtual Colonoscopy, IMPAX PET-CT Viewing, and IMPAX Reporting
(embedded speech recognition)
80 GB minimumHard drive space
Not applicableModem
YesDVD-ROM drive
Not applicableTape backup
Not applicableFloppy drive
System comes with an integrated 100/1000 Mbps Ethernet adapterNetwork interfaces
DefaultPower supply
AS300 Upgrade Guide—IMPAX 5.2 or 5.3 to IMPAX 6.5.3 96
Agfa Company Confidential—Subject to Non-Disclosure Obligation