Installation guide

To restart an archive queue
1. Log into the IMPAX 6.5.3 Administration Tools.
2.
On the Daily tab, select Job Manager.
3. In the queue list, select the archive queue.
4.
Click Restart.
Restarting Connectivity Manager queues
(Topic number: 67610)
4.
If Connectivity Manager is currently deployed, and you have stopped any queues, use the Queue
Manager to restart them. Once the queue is restarted, messages sitting in them are processed.
To restart Connectivity Manager queues
1.
In the Connectivity Manager Service Tools, click Queue Manager.
2. In the Queue List table, select the checkbox beside the queue of any system device or real world
device with a DM Out or impax_report_server Component.
The Status of the queue should be Stopped.
3.
Click start.
The Status of the queue changes to Started.
Taking a post-upgrade system snapshot
(Topic number: 6845)
5.
After upgrading to IMPAX 6.5.3, use the migration_inventory tool to capture the state of the system
to compare it with the previous IMPAX system. Perform this task on any computer on which the
Migration Tools have been installed that can access the 6.5.3 Database Server.
To take a post-upgrade system snapshot
1. In a command prompt or terminal window, change to the directory containing the
migration_inventory tool.
2. On a Windows server, type
migration_inventory -s -d database_name -U database_user_name -P database_password
-D Database_Server_host_name
The output is stored in the migration_info table. It lists the number of IMPAX studies, total
objects, and objects in cache. It also lists all IMPAX source stations and DICOM printers.
3. To create a report file with this information, type
mig_reporter -t system_inventory_tool (Windows)
AS300 Upgrade Guide—IMPAX 5.2 or 5.3 to IMPAX 6.5.3 66
Agfa Company Confidential—Subject to Non-Disclosure Obligation