Installation guide

network domain called radnet, and radnet is within the healthorg.com domain, the name to
type would be radserver.radnet.healthorg.com.
9. On the IMPAX Login Type screen, select the appropriate authentication method: Windows,
IMPAX, or Smart Card.
•
Windows Authentication—Logs into IMPAX using the Windows session credentials
after launching the IMPAX Client or logging in with a Windows smart card.
•
IMPAX Authentication—Logs into the IMPAX Client separately from Windows. (If
unsure of which option to select, use IMPAX Authentication.)
•
Smart Card Authentication—Logs into the IMPAX Client with a smart card in the
National Health Service (NHS) environment only.
10.
Click Next.
11.
On the Ready to Install the Program screen, click Install.
The program is installed.
12.
On the Install shield Wizard Completed screen, click Finish.
The IMPAX Client software is installed. You do not have to restart the computer.
13. We recommend confirming that the Client can access the core servers.
14. Check that the Agfa Service user with administrators group was created by the installer. If the
AgfaService user was not created by the installer, you can manually create it. For more details,
see Troubleshooting: AgfaService user not created by the installer (refer to page 76).
Restarting antivirus software
(Topic number: 9916)
7.
If you have antivirus software installed and have halted any scan jobs, restart the antivirus services.
To restart antivirus software
1. On a Windows server where scanning was stopped, launch the antivirus software.
2. Start the scan operation according to the vendor’s instructions.
AS300 Upgrade Guide—IMPAX 5.2 or 5.3 to IMPAX 6.5.3 62
Agfa Company Confidential—Subject to Non-Disclosure Obligation