Installation guide

2. Type
w32tm /config /syncfromflags:manual /manualpeerlist:time_server
where time_server is the DNS name or IP address of the time server. The time_server can be
any Windows- or Solaris-based server.
3. To update Windows Time Service to use the new configuration, type
w32tm /config /update
4. To synchronize the clock, type
w32tm /resync
Upgrading Clients to IMPAX 6.5.3
(Topic number: 10176)
6.
IMPAX Clients, both local and remote, are used to view study images. The Client software can be
installed on any appropriate, networked workstation and be used by anyone who has a valid license.
At least one Client should be upgraded to IMPAX 6.5.3 for migration testing purposes.
Important!
After upgrading IMPAX, you must enable any scheduled worklists to add them to the
IMPAX 6.5.3 Client List area. In the List area, click Worklists. In the Active column next to
the worklist, select the checkbox for each worklist to display, then press Enter.
For more details, refer to “Adding worklists to the List area” (topic number 8433) in the IMPAX
6.5.3 Client Knowledge Base: Extended.
Manually uninstalling the IMPAX 5.2 or 5.3 Client software
(Topic number: 51525)
1.
IMPAX 5.2 or 5.3 Client software must be uninstalled before the IMPAX 6.5.3 Client software can
be installed.
To manually uninstall the IMPAX 5.2 or 5.3 Client software
1. Open Control Panel.
2.
Select Add or Remove Programs.
3.
Under Currently installed programs, select IMPAX Client ES and click Remove.
4.
At the Are you sure you want to remove this program? prompt, click Yes.
5.
If a Files Not Removed dialog opens, to remove the remaining files, click Yes.
6.
At the Uninstall Successful message, click OK.
7. Restart the computer.
AS300 Upgrade Guide—IMPAX 5.2 or 5.3 to IMPAX 6.5.3 59
Agfa Company Confidential—Subject to Non-Disclosure Obligation