Installation guide

Although multiple Curators may be installed, each Curator places web representations of objects
into the same web cache. This web cache is owned by the master Curator and is managed by the
Autopilot running on the master Curator.
Creating a web cache volume
(Topic number: 7069)
1.
You must manually create cache folders on the system. You can then configure the cache volume
in Administration Tools on the Database Server.
To create a web cache volume
1. On the Database Server, log into the Administration Tools.
2.
Click Cache Manager.
3.
Click New Cache Volume.
4.
Select Web Cache.
5. From the Station list, select the station where the master Curator is installed.
6. In the Path field, type the path for the new cache volume.
• Specify the cache location using a UNC path.
• Do not use a trailing slash or backslash at the end of the volume path, because this can
create problems when retrieving images from the cache. For example, do not type
\\server\WEBCACHE1\; instead, type \\server\WEBCACHE1.
• All caches on the system (image and web) must be shared. Shared caches are specified
without the volume letter; for example, instead of \\server\f$\CACHE1, type
\\server\CACHE1.
• If cache volumes are assigned to a subdirectory on a partitioned hard drive, the values
shown in the Available and Occupied columns in Cache Manager refer to the entire
partition, not the subdirectory.
7.
Click Add.
8.
In the Warning dialog, verify that the path is correct and click Yes.
Configuring cache folder permissions for remote caches and NAS
(Topic number: 7068)
2.
If the cache is hosted remotely or if you are setting up network area storage (NAS), after the cache
is created, create a user account for the ImpaxServerUser on the system hosting the cache.
To configure cache folder permissions for remote caches and NAS
1. On the Database Server, open a command prompt or terminal window.
AS300 Upgrade Guide—IMPAX 5.2 or 5.3 to IMPAX 6.5.3 47
Agfa Company Confidential—Subject to Non-Disclosure Obligation