Installation guide

Modifying the IMPAX 6.5.3 AS300 installation packages
(Topic number: 7605)
2.
If the Curator station was initially staged as an IMPAX 6.5.3 AS300 single-host station during the
pre-upgrade period, change the AS300 software installation to remove the database packages and
add the Curator packages.
To modify the IMPAX 6.5.3 AS300 installation packages
1. Ensure that the training server (the future Curator station) is offline (refer to page 32).
2. Open Control Panel.
3.
Depending on the version of Windows, select Add or Remove Programs or Programs and
Features.
4.
Under Currently installed programs, select AGFA IMPAX AS300.
5.
Click Change.
6.
At the prompt, type your name and click Next.
7.
At the Welcome dialog, select Modify. Click Next.
8.
Clear the checkboxes of all AS300 packages other than MVFCore, MVFCurator, and
MVFcdexport.
Where a single-host Database Server has almost all available AS300 packages installed, a Curator
server requires only these three packages.
9.
Click Next.
10.
In the Maintenance Complete dialog, select Yes, I want to restart my computer now and click
Finish.
11. If no longer required on this server, you can also delete any Server license files stored in the
C:\mvf directory.
Licenses are required if the MVFNetworkGateway package is installed, or if the server is being
used for archiving (HSM or PACS Store and Remember).
Setting up the Curator web cache
(Topic number: 7029)
3.
If you did not create a web cache for Curator when you configured the Database Server, create the
web cache now. The cache must be created from the Database Server.
Note:
For Autopilot to correctly monitor cache space, each cache must be on its own partition.
AS300 Upgrade Guide—IMPAX 5.2 or 5.3 to IMPAX 6.5.3 46
Agfa Company Confidential—Subject to Non-Disclosure Obligation