Installation guide

The information in this publication is subject to change without notice.
2012 - 9 - 17
Manufacturer’s responsibility
The manufacturer, installer, or importer will be responsible for the safety, reliability, and performance
of the equipment only if:
• Installation, modifications, adjustments, changes, or repairs are performed by suitably qualified
service personnel.
• The electrical installation of the site in which the equipment is used is according to an applicable
safety standard (UL, CSA, or IEC/CDE).
• The equipment is used according to the instructions provided in the operation manuals.
• No software other than that which is distributed with this package or is sanctioned by Agfa
will reside on the IMPAX 6.5.3 computers.
External software licenses
(Topic number: 7696)
Information about third-party software licenses and copyrights can be found in External
software licenses (refer to page 99).
Giving feedback on the documentation
(Topic number: 122201)
Thank you for taking the time to provide feedback. Your comments will be forwarded to the group
responsible for this product’s documentation.
If you have a request for changes in the product, please contact your product sales representative or
the product’s technical support channel.
To give feedback on the documentation
1. In an email subject line or body, list which product, version, and publication you are
commenting on.
For example, “IMPAX 6.4 SU01 Client Knowledge Base: Extended”. (You can find this
information in the footer of the publications.)
2. Describe the incorrect, unclear, or insufficient information. Or, if you found any sections
especially helpful, let us know.
3. Provide topic titles and topic numbers where applicable.
Including your personal contact details is optional.
AS300 Upgrade Guide—IMPAX 5.2 or 5.3 to IMPAX 6.5.3 3
Agfa Company Confidential—Subject to Non-Disclosure Obligation