Installation guide

Deleting old log files
(Topic number: 7706)
15.
Important!
This topic applies only when upgrading an existing server (in-place upgrade).
On the server being upgraded, remove any old log files to ensure that all future log information is
a result of the upgrade procedure.
To delete old log files
1. On the server to be upgraded, open a command prompt.
2.
Change to the C:\mvf\bin\ directory.
3.
Run stopall.bat.
4. For future reference, copy all files in C:\mvf\data\logs\ to a backup location.
5. Delete all the log files from C:\mvf\data\logs.
Uninstalling IMPAX documentation
(Topic number: 7610)
16.
You must uninstall any existing IMPAX documentation before you can install the new IMPAX 6.5.3
documentation.
Uninstalling IMPAX 5.2 or 5.3 documentation
(Topic number: 10734)
IMPAX 5.2 and 5.3 had separate Client and Server Knowledge Bases, each of which must be separately
uninstalled. This documentation may have been installed on any 5.2 or 5.3 IMPAX Client or Server
machines.
Removing the IMPAX 5.2 or 5.3 Client Knowledge Base
(Topic number: 58578)
1.
If the IMPAX 5.2 or 5.3 Client Knowledge Base is installed, you must uninstall it before upgrading.
To remove the IMPAX 5.2 or 5.3 Client Knowledge Base
1. Open Control Panel.
AS300 Upgrade Guide—IMPAX 5.2 or 5.3 to IMPAX 6.5.3 20
Agfa Company Confidential—Subject to Non-Disclosure Obligation