Installation guide

To run the Cross-Cluster Dictation Interlock tool
1. On the 6.5.3 Application Server where the Relay service is running, open a command prompt.
2. Type the following command:
net start StudyStatusRelayService
3. Exit the command prompt.
Taking a system snapshot
(Topic number: 7613)
3.
Before upgrading to IMPAX 6.5.3, use the migration_inventory tool to capture the current state of
the system for later comparison. Perform this task on any computer that has access to the AS300
database to be migrated and on which the Migration Tools have been installed.
To take a system snapshot
1.
At a command prompt, change to the C:\mvf-mig6\bin directory.
2. Type
migration_inventory -d database_name -U database_user_name -P database_password -s
-D Database_Server_host_name
The output is stored in the migration_info table. It lists the number of IMPAX studies, total
objects, and objects in cache. It also lists all IMPAX source stations and DICOM printers.
3. To create a report file with this information, type
mig_reporter -t system_inventory_tool
This command writes the output of the migration_inventory command to a report file in the
C:\mvf-mig6\reports directory.
Emptying Connectivity Manager queues
(Topic number: 113307)
4.
Before shutting down IMPAX to upgrade the system, empty all DM Out or impax_report_server
queues. Consult Connectivity Manager service personnel to discuss queues that have error
transactions.
To empty Connectivity Manager queues
1.
In Connectivity Manager, open Service Tools and click Queue Manager.
2. Select any device with either pending or error transactions and empty the queues.
3. Retry recent messages and delete older messages, since newer transactions may have updated
patient, study, and report data after these transactions entered an error state.
AS300 Upgrade Guide—IMPAX 5.2 or 5.3 to IMPAX 6.5.3 13
Agfa Company Confidential—Subject to Non-Disclosure Obligation