Installation guide

Adding a PACS Store and Remember archive
(Topic number: 9215)
1.
To configure an external PACS archive as a PACS Store and Remember archive, set up the external
PACS archive in Network Management in the IMPAX Administration Tools.
To add a PACS Store and Remember archive
1. Launch and log into the IMPAX Administration Tools.
2.
On the Setup tab, click Network Management.
3.
To set up a new destination, click New.
4. Type the AE title of the external PACS archive.
If adding the PACS archive for DAA consolidation purposes, use a temporary AE title here,
such as SR_EXT. Later, this is changed to the AE title of the old archive.
5. Type an alias for the archive.
6. Type the host name or IP address of the archive.
7.
Click Save.
8.
Switch to the Capabilities tab.
9. From the list at the bottom of the manager, select the added external PACS archive.
10.
Under Station Type, select PACS.
11.
Under Server is Allowed to, select Query/Retrieve from Station.
12. If using different AE titles on the external PACS archive for store and retrieve jobs, repeat
steps 3 to 11 for the retrieve AE title.
13.
Click Save.
If migrating a Direct Attached Archive (DAA), do not run the install_pacs.bat or install_pacs
script. The PMTS tool handles this.
Connecting to PACS Store and Remember in the other cluster
(Topic number: 125161)
2.
You must connect the temporary DAA cluster to the upgraded IMPAX 6.5.3 PACS Store and
Remember archive.
To connect to PACS Store and Remember in the other cluster
1. Obtain and install an archive license key on the new PACS Store and Remember server.
2. On the temporary DAA system, log into the IMPAX Administration Tools
3.
On the Setup tab, click Network Management.
4. Add the IMPAX 6.5.3 system. Save the settings.
AS300 Upgrade and DAA Consolidation Guide—IMPAX 6.2 or 6.3 to IMPAX 6.5.3 44
Agfa Company Confidential—Subject to Non-Disclosure Obligation