Installation guide

2. In the Queue List table, select the checkbox beside the queue of any system device or real world
device with a DM Out or impax_report_server Component.
The Status of the queue should be Stopped.
3.
Click start.
The Status of the queue changes to Started.
Taking a post-upgrade system snapshot
(Topic number: 6845)
17.
After upgrading to IMPAX 6.5.3, use the migration_inventory tool to capture the state of the system
to compare it with the previous IMPAX system. Perform this task on any computer on which the
Migration Tools have been installed that can access the 6.5.3 Database Server.
To take a post-upgrade system snapshot
1. In a command prompt or terminal window, change to the directory containing the
migration_inventory tool.
2. On a Windows server, type
migration_inventory -s -d database_name -U database_user_name -P database_password
-D Database_Server_host_name
The output is stored in the migration_info table. It lists the number of IMPAX studies, total
objects, and objects in cache. It also lists all IMPAX source stations and DICOM printers.
3. To create a report file with this information, type
mig_reporter -t system_inventory_tool (Windows)
This command writes the output of the migration_inventory command to a report file in the
/usr/mvf-mig6/reports or C:\mvf\mig6 directory.
Comparing pre- and post-upgrade snapshots
(Topic number: 6895)
18.
Open the report file that contains the pre- and post-upgrade snapshot information. Compare the
pre- and post-upgrade information. Ensure that all expected studies, objects, stations, and DICOM
printers are still listed.
AS300 Upgrade and DAA Consolidation Guide—IMPAX 6.2 or 6.3 to IMPAX 6.5.3 42
Agfa Company Confidential—Subject to Non-Disclosure Obligation