Installation guide

Clearing the archive Logical Volume
(Topic number: 7734)
13.
To avoid conflicts when upgrading, clear the archive Logical Volume. IMPAX re-creates the Logical
Volume folders and files afterward. (If replacing the existing server with a new one, this task is not
required.)
CAUTION!
Ensure that the Logical Volume is empty before deleting it. If it is not empty, create a store
job to archive the images in the Logical Volume.
To clear the archive Logical Volume
1.
In the 6.2 or later Administration Tools, on the Setup tab, select Archive Manager.
2.
Select the Logical Volume and click Close.
3.
At the Close Volume prompt, click Yes.
4. Ensure that the Archive queue is halted.
5. Delete the Logical Volume folder and files from the drive.
The Logical Volume folder and files are automatically re-created by IMPAX.
Deleting old log files
(Topic number: 7706)
14.
Important!
This topic applies only when upgrading an existing server (in-place upgrade).
On the server being upgraded, remove any old log files to ensure that all future log information is
a result of the upgrade procedure.
To delete old log files
1. On the server to be upgraded, open a command prompt.
2.
Change to the C:\mvf\bin\ directory.
3.
Run stopall.bat.
4. For future reference, copy all files in C:\mvf\data\logs\ to a backup location.
5. Delete all the log files from C:\mvf\data\logs.
AS300 Upgrade and DAA Consolidation Guide—IMPAX 6.2 or 6.3 to IMPAX 6.5.3 22
Agfa Company Confidential—Subject to Non-Disclosure Obligation