Installation guide

The Location column on the results list shows the current location of the study, and indicates
which studies are only in cache (C for system cache, L for local station cache, W for web cache)
and not also in an archive location (such as P for PACS archive).
6.
Click Store to Archive.
7.
To update the status of the selected studies, click Refresh.
8. Ensure that all studies are archived.
Tip:
To store unarchived studies, you could also use the Migration Toolbox and run the
study_archive_report tool. For details, see “Running an initial report on study archiving status”
(topic number 6630) in the AS300 Preparing to Upgrade Guide—IMPAX 6.2 or Later to IMPAX
6.5.3 or the AS3000 Preparing to Upgrade Guide—IMPAX 6.2 or Later to IMPAX 6.5.3.
Closing and mirroring archive volumes
(Topic number: 7733)
9.
Close all open primary volumes before upgrading. Open mirror volumes are closed automatically
when a SYNC job completes successfully with the corresponding closed primary volume. Fresh
volumes may remain open, as they do not contain any studies.
To close and mirror archive volumes
1.
In the 6.2 or later Administration Tools, on the Setup tab, select Archive Manager.
2.
Switch to the Volumes tab.
3.
Select a logical volume and click Close Logical Volume.
4. If the system has a jukebox archive, you may have to wait for the sync job to finish.
If the system has a non-jukebox archive, to ensure that a backup of the data exist, perform a
mirror procedure manually.
5.
On the Daily tab, select Job Manager.
6. Check the Delivery Date Time column for jobs that are not scheduled to run until later. If any
exist, schedule these jobs to complete now, using the Set Delivery Date and Time option at
the top.
AS300 Upgrade and DAA Consolidation Guide—IMPAX 6.2 or 6.3 to IMPAX 6.5.3 20
Agfa Company Confidential—Subject to Non-Disclosure Obligation