Installation guide

6. Make note of the installed packages.
7.
When done, to avoid changing the packages, click Cancel.
To record the names of previously installed IMPAX 6.2 or 6.3 AS300 software packages
1.
On the IMPAX 6.2 or 6.3 Windows server to upgrade, select Start > Run.
2.
In the Open field, type regedit and click OK.
3.
In the Registry Editor, select HKEY_LOCAL_MACHINE\SOFTWARE\Mitra Imaging Inc.
and HKEY_LOCAL_MACHINE\SOFTWARE\Mitra and make note of the installed packages
(refer to page 59).
Taking a system snapshot
(Topic number: 7613)
2.
Before upgrading to IMPAX 6.5.3, use the migration_inventory tool to capture the current state of
the system for later comparison. Perform this task on any computer that has access to the AS300
database to be migrated and on which the Migration Tools have been installed.
To take a system snapshot
1.
At a command prompt, change to the C:\mvf-mig6\bin directory.
2. Type
migration_inventory -d database_name -U database_user_name -P database_password -s
-D Database_Server_host_name
The output is stored in the migration_info table. It lists the number of IMPAX studies, total
objects, and objects in cache. It also lists all IMPAX source stations and DICOM printers.
3. To create a report file with this information, type
mig_reporter -t system_inventory_tool
This command writes the output of the migration_inventory command to a report file in the
C:\mvf-mig6\reports directory.
Staging a temporary Database Server for DAA
consolidation
(Topic number: 125422)
3.
To later perform DAA consolidation, stage new hardware as a Database Server running the same
version of IMPAX and SQL Server as the production cluster. For instructions, refer to the appropriate
installation guide: IMPAX 6.2 AS300 Installation Guide, IMPAX 6.3 AS300 Installation Guide, or
IMPAX 6.4 AS300 Installation Guide.
AS300 Upgrade and DAA Consolidation Guide—IMPAX 6.2 or 6.3 to IMPAX 6.5.3 16
Agfa Company Confidential—Subject to Non-Disclosure Obligation