Installation guide

Copying the 5.2 or 5.3 Cross-Cluster Dictation Interlock
components
(Topic number: 48082)
2.
To communicate dictation status with the IMPAX 6.5.3 system, Cross-Cluster Dictation Interlock
components must be added to a Windows-based computer in the IMPAX 5.2 or 5.3 cluster.
To copy the 5.2 or 5.3 Cross-Cluster Dictation Interlock components
1. On the 6.5.3 Application Server where the zip file was extracted, from the mvf-signal-relay
directory, copy the mvf_signal_relay.exe and install_signal_relay.bat files.
2. On the IMPAX 5.2 or 5.3 computer to run the components on, in the C:\mvf\bin directory,
paste the two files copied in the previous step.
3.
Open a command prompt and change to the C:\mvf\bin directory.
4.
Type install_signal_relay.bat remote_host_name
where remote_host_name is the host name or IP address of the Application Server that will be
running the IMPAX 6.5.3 Cluster Dictation Interlock service.
5.
Open the Windows Administrative Tools and select Services.
6. Start the service.
The install_signal_relay.bat file installs the mvf_signal_relay.exe as a Windows service, inserts default
values into the map_ini, and creates a radiologist and a trainee radiologist user. These users are used
by the service to change status when appropriate. The radiologist user is called signal-relay and the
trainee radiologist is called sig-relay-train.
Updating map_ini values for Cross-Cluster Dictation Interlock
(Topic number: 48091)
3.
For the connection between the 5.2 or 5.3 cluster and the IMPAX 6.5.3 cluster to work, some of the
default values added to the 5.2 or 5.3 IMPAX MAP_INI file must be changed.
To update map_ini values for Cross-Cluster Dictation Interlock
1. Launch CLUI.
2. To update the remote hostname, type
update map_ini set ini_value='remote_host_name' where ini_section='signal-relay' and
ini_key='remote_host'
where remote_host_name is the name of the IMPAX 6.5.3 Application Server where the service
will run.
3. To update the remote port value, type
update map_ini set ini_value='remote_port_value' where ini_section='signal-relay' and
ini_key='remote_port'
AS300 Upgrade and DAA Consolidation Guide—IMPAX 5.2 or 5.3 to IMPAX 6.5.3 54
Agfa Company Confidential—Subject to Non-Disclosure Obligation