Installation guide

This bash script has no log files. All of the information is output to the screen.
4. To remove references to the HSM server archive locations, type
mvf_remove_archive_pre6.exe -A HSM_AE_title -d mvf -U mvf -P mvf -Q -l debug –f logfile
Important!
De-referencing HSM server archive location may take between 4 and 8 hours, depending
on the system and the size of the archive being removed.
5. To remove image caches and locations of Network Gateways that are no longer applicable,
type
bash mvf-remove-caches -a Network_Gateway_AE_title
After removing caches, the is_cached flag in the dosr_study may not be accurate.
6. To fix the is_cached flag, type
Select module_ref from mvf_ts_config where module_name = 'UPDATE_IS_CACHED' and
ae_ref = local_AE_reference
Signal WAKE_MVF_TASK_SCHEDULER_MODULE module_ref_from_previous_command
MVF_TASK_SCHEDULER
7. To remove all references to HSM archives and Network Gateways that have migrated to the
IMPAX 6.5.3 cluster, type
mvf-remove-ae.exe -d mvf -U mvf -P mvf AE_title -l debug -f logfile
Run this script once for each AE title to remove.
8. Check the log file for any errors.
Restarting the parallel IMPAX AS300 systems
(Topic number: 125419)
3.
After any HSM and Network Gateway servers are upgraded and incorporated into the IMPAX 6.5.3
cluster, both IMPAX systems must be restarted to allow them to work in parallel.
To restart the job queues on the IMPAXsystems
1. On the IMPAX 5.3 or earlier Database Server, restart the job queues:
a.
In the Service Tools, select Job Manager.
b.
To start every queue, from the Queue list, select All queues.
c.
Click Restart Queue.
d.
To confirm the queue restart, click Yes.
e. Close Service Tools.
2. Repeat the previous step in the IMPAX 6.5.3 Administration Tools.
AS300 Upgrade and DAA Consolidation Guide—IMPAX 5.2 or 5.3 to IMPAX 6.5.3 45
Agfa Company Confidential—Subject to Non-Disclosure Obligation