Installation guide

Note:
The IMPAX 6.5.3 AS300 server platform is Windows Server 2008 R2 SP1. If necessary,
existing servers can be restaged with this operating system, assuming that the hardware is
64-bit compatible. All upgrades are forklift upgrades and involve fresh installations onto
restaged or new hardware. Refer to the IMPAX 6.5.3 AS300 Installation and Configuration
Guide for more details.
Prior to a forklift upgrade of an IMPAX AS300 Network Gateway, Archive Server, or Curator, any
critical files should be backed up to an appropriate location. During the upgrade itself, the files on
the new server can be compared with that of the old server.
Halting all queues
(Topic number: 59660)
1.
Halt all queues until the upgrade is done.
To halt all queues
1.
In the Service Tools, on the Daily tab, select Job Manager.
2.
In the queue list, select All Queues.
3.
Click Halt Queue.
4.
To confirm that you want to halt the queues, click Yes.
Removing references from the database running the previous
version of IMPAX
(Topic number: 123355)
2.
Important!
Perform these steps only if migrating some HSM, PACS Store and Remember, or Network
Gateway servers from the IMPAX 4.5 or 5.2 system to the new IMPAX 6.5.3 system, and
intending to run both systems in parallel.
To move some servers from the IMPAX 5.3 or earlier system to the new IMPAX 6.5.3 system, remove
references to these from the IMPAX 5.3 or earlier database.
To remove references from the database running the previous version of IMPAX
1.
Copy the MVFdact.exe file to the IMPAX 5.3 or earlier Database Server and run the file.
2.
Open a command prompt on that server and change to the C:\mvf\bin directory.
3. To remove references to HSM server image caches and locations that are only in the IMPAX 6.5.3
system, type
bash mvf-remove-caches -a HSM_AE_title
AS300 Upgrade and DAA Consolidation Guide—IMPAX 5.2 or 5.3 to IMPAX 6.5.3 44
Agfa Company Confidential—Subject to Non-Disclosure Obligation