Installation guide

4. Add the IMPAX 6.5.3 system. Save the settings.
5.
Verify that the external archive is listed in the hosts file of the IMPAX 5.3 or earlier system.
6. To confirm that the external archive can be accessed, ping the external archive using the host
name or IP address.
Important!
The PACS Store and Remember archive functionality requires that an SCP be running on
the new system. If not available, add the Network Gateway package to one of the IMPAX 6.5.3
servers.
Converting DAA entries to PACS Store and
Remember
(Topic number: 123349)
2.
Because the database on the IMPAX 6.5.3 system was upgraded from the previous IMPAX system,
it contains references to the DAA system that is no longer supported. Use a re-referencing tool to
convert these DAA entries to PACS Store and Remember archive entries.
To convert DAA entries to PACS Store and Remember
1.
On the IMPAX 6.5.3 Database Server, open a command prompt and change to the C:\mvf\bin
directory.
2. To mark all DAA references as offline, type
bash mvf-offline-vols -x
If the following message appears, it indicates a bash version issue:
NOTE: Using the -x to execute updates will update all AE_REFs if there are
multiple AE_REFs listed above.
3. If you need to work around the bash version issue, in the command prompt, type
bash
$ .\mvf-offline-vols -x
exit
4. To verify that all DAA references are offline:
a. Ensure that the script ends by displaying HSM and offline studies.
For example:
1002 H 1.00000
1004 O 2.00000
In this output H indicates HSM and O indicates offline.
AS300 Upgrade and DAA Consolidation Guide—IMPAX 5.2 or 5.3 to IMPAX 6.5.3 40
Agfa Company Confidential—Subject to Non-Disclosure Obligation