Installation guide

4
Migrating the archive
The studies previously managed in a direct attached archive need to be made accessible in the new
IMPAX 6.5.3 cluster. Do this initially using PACS Store and Remember. These can then gradually
be converted to HSM archive entries.
Installing PACS Store and Remember on the
IMPAX 6.5.3 cluster
(Topic number: 132671)
1.
To convert DAA entries to PACS Store and Remember, install and configure a PACS Store and
Remember AE title on the IMPAX 6.5.3 cluster, then install the PMTS tool set on the PACS Store
and Remember server of that cluster.
You can install the PACS Store and Remember component on any non-Archive Server of the new
IMPAX 6.5.3 cluster, including any of the Network Gateways or the Database Server.
Important!
These tasks are applicable only to a parallel migration with DAA Server scenario or with an
HSM archive that will remain in the old cluster. Converting a cached Network Gateway to a
PACS Store and Remember archive is not supported.
Install a separate PACS Store and Remember archive for each DAA archive. For example, if the
legacy IMPAX system has two DAA libraries, install two PACS Store and Remember servers on the
IMPAX 6.5.3 system.
AS300 Upgrade and DAA Consolidation Guide—IMPAX 5.2 or 5.3 to IMPAX 6.5.3 38
Agfa Company Confidential—Subject to Non-Disclosure Obligation