Installation guide

The MAC address of all Ethernet cards installed on the station are listed. You can use any of
these to generate the license from.
2. Copy one of the returned MAC addresses to a secure place.
Ensure that you copy down the address exactly as it appears, including leading zeroes.
The MAC addresses contain only the alphanumeric characters 0-9 and A-F.
3. To obtain a license key for the server, send the MAC address information to
[e-mail], along with the type of component being installed on that server.
Staging new servers
(Topic number: 125282)
3.
Stage the new Database Server, Curator, and Application Server with the IMPAX 6.5.3 software. To
do so, follow the procedures in the IMPAX 6.5.3 AS300 Installation and Configuration Guide, IMPAX
6.5.3 Curator and CD Export Server Installation Guide, and IMPAX 6.5.3 Application Server Installation,
Upgrade, and Configuration Guide. While doing so, keep the following in mind:
• Stage the new Database Server with a different host name than the existing Database Server.
Otherwise the two will not be able to run in parallel.
• You can install new Network Gateway and Archive Server stations or install these components
on the new Database Server initially, then optionally move the old stations over to the cluster
later on (where applicable).
• The Installation Guides describe the use of the Oracle database, but for upgrades, you must
stay with SQL Server. Therefore, the instructions on how to install SQL Server 2008 R2 (refer
to page 20) and how to install the IMPAX Database Server under SQL (refer to page 24) are
included in this guide.
• Install or upgrade Client stations as it makes senses. For instructions, refer to the IMPAX 6.5.3
Client Installation, Upgrade, and Configuration Guide.
Installing SQL Server 2008 R2
(Topic number: 141825)
1.
Note:
SQL Server 2008 R2 is not distributed with IMPAX but is available from the Agfa Parts Center.
Before beginning the installation, make note of the sa password to use, as you will be prompted
to supply it.
We recommend that you install the SQL Server database on a drive other than C:; for example,
the E: drive. For more details, see “Recommended disk partitions” (topic number 7056) in the
IMPAX 6.5.3 AS300 Installation and Configuration Guide.
AS300 Upgrade and DAA Consolidation Guide—IMPAX 5.2 or 5.3 to IMPAX 6.5.3 20
Agfa Company Confidential—Subject to Non-Disclosure Obligation