Installation guide

Note:
Complete any alterations or reconfigurations of the SCSI chain before disabling the changer. If the
changer is disabled first and then the SCSI chain is reconfigured or altered, the Windows Device
Manager automatically re-enables any disabled devices. If the SCSI chain must be altered or
reconfigured, after the changes are complete, restart the computer and use the Windows Device
Manager to disable the changer again.
For more information on the Device Manager and disabling devices, refer to the Microsoft online help.
Enabling auto play
Autoplay should be enabled by default. However, if it is not, you must enable it to avoid problems
between IMPAX and archive devices.
1. Select Start > Run.
2. In the Open field, type regedit and click OK.
3. In the Registry Editor dialog, expand HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet
> Services and select Cdrom.
4. Ensure that the value of AutoRun is 1. If it is not, change the value to 1.
5. Close the Registry Editor dialog.
6. To run the Group Policy Management Console, select Start > Run.
7. In the Open field, type gpedit.msc and click OK.
8. In the Group Policy dialog, expand Computer Configuration > Administrative Templates.
9. Click System.
10. Double-click Turn off Autoplay.
11. Ensure that the Not Configured option is selected.
12. Close the Group Policy dialog.
13. If you made any changes in the registry or Group Management Console, restart the computer.
Continuing the upgrade17.
You can now proceed to install the hardware and software on the new Database Server. Refer to
Installing hardware and software on an AS300 server (refer to page 26).
IMPAX 6.3 AS300 Installation Guide 77