Installation guide

To install the archive license key
1. Match up the correct license key with the server's MAC address.
The license key name is the MAC address with a .lic file extension.
2. Select Start > All Programs > Accessories > Windows Explorer.
3. Copy the archive license key to the C:\mvf directory on the hard drive.
4. Rename the license key to mvfarch.lic.
Installing the Application Server4.
Before configuring IMPAX Server, install the Application Server software. Refer to the IMPAX 6.3
Application Server Installation Guide.
Configuring IMPAX Server5.
After the Application Server is installed, complete the configuration of IMPAX Server software. Refer
to the IMPAX 6.3 AS300 Configuration Guide.
Installing the IMPAX Server documentation6.
The IMPAX Server documentation is located on the IMPAX Documentation CD. You install it on an
IMPAX Application Server, not on any of the AS300 or AS3000 servers. Refer to Installing the IMPAX
documentation in Chapter 3 of the IMPAX 6.3 Application Server Installation and Upgrade Guide.
Installing and configuring Curator7.
If you installed Curator on an AS300 single-host server, Archive Server, or Network Gateway machine,
configure Curator after installing the Application Server and performing its initial configuration. Refer
to "Configuring Curator INI settings" in Chapter 2 of the IMPAX 6.3 AS300 Configuration Guide.
If you are installing Curator on a separate machine, or on multiple machines in a master-slave
configuration, do this after installing the Application Server and performing its initial configuration,
as well as after configuring all the other IMPAX Server components. Refer to the IMPAX 6.3 Curator
and CD Export Server Installation Guide.
IMPAX 6.3 AS300 Installation Guide 68