Installation guide

The mvf.psd file is imported under C:\mvf.
13. In the Summary dialog, to continue the installation, click Next.
The files are copied.
14. If you are using a jukebox CD-R or DVD-R archive, the Veritas Px Engine is installed. This engine
must be installed to burn to DVD. Follow the prompts in the Veritas Px Engine Setup. When
prompted to restart the computer after the engine is installed, click No.
CAUTION!
The IMPAX installation does not complete successfully if you restart the system at this time.
The system must only be restarted after all packages are installed and the database scripts
have been run.
To ensure that all services are restarted correctly, always restart the computer.
15. After all the packages have been installed, to close the installation dialog and reboot the system,
click Yes, I want to restart my computer now.
If you are not prompted to restart your computer, manually restart the computer by selecting
Start > Shut Down. In the Shut Down Windows dialog, from the list, select Restart and click
OK.
Checking subpackage installations3.
The packages installed by the IMPAX installer use response files and the mitra_install.log file to monitor
the success of the installations. Refer to these files to determine if the installations were successful.
To check the response code of installed packages
1. Check the log files located in C:\mvf\data\install.
Each package has its own log file. For a clean installation of a sub-package, the ResultCode is
zero. Any other number indicates a failure.
Note:
The packages installed using the installer are not visible in Add/Remove Programs.
To check the status of installed packages
1. Check the log file C:\mvf\data\logs\mitra_install.log.
The installation details for each installed package are listed.
Restarting the system4.
This topic applies only if you are upgrading from a single-host configuration to a multi-host
configuration.
IMPAX 6.3 AS300 Installation Guide 60