Installation guide

5. Set the partition size to 20 GB and press Enter.
6. To set up Windows on the partition, press Enter.
7. Select Format the Partition using NTFS File System and press Enter
The partition is formatted and files are copied. Depending on how big the partition is, this may
take several minutes.
8. Follow the setup wizard using the following selections:
ResponseWindow
AgfaName
AgfaOrganization
Windows ID numberProduct Key
Per Server licensing, 5 licensesLicense Mode
As specified on orderComputer Name
The maximum length for the hostname is 16 characters
CAUTION!
To communicate properly with the Database Server software,
you must enter the Computer Name in all uppercase letters.
Typical or as per your network administration policyNetwork Setting
Select the Workgroup option, unless the computer will be
connecting to the hospital domain for authentication. In this case,
select Domain.
Workgroup/Domain
Workgroup name is IMPAX.
9. When disk 1 installation is complete, restart the server.
10. When prompted, insert Windows Server 2003 R2 disk 2 into the server’s CD drive.
11. When disk 2 installation is complete, restart the server.
12. Install the latest Windows Update patches.
CAUTION!
When installing Windows Update patches, do not install the Malicious Software Removal Tool. This
tool may try to remove IMPAX software.
IMPAX 6.3 AS300 Installation Guide 27