Installation guide

3
Installing hardware and
software on an AS300
server
Before installing IMPAX on a server, you must install and configure the required hardware and software
components.
If you are using an Oracle Database Server on a Solaris host (in a mixed-host configuration), refer to
the Getting started and Setting up a Solaris server sections of the IMPAX 6.3 AS3000 Installation and
Configuration Guide. (If you are upgrading from an AS3000 to a mixed-host configuration, you do not
have to set up the Solaris server.)
Installing Windows Server 2003 R21.
To install IMPAX 6.3, Windows must first be installed on your machine. Before you begin, ensure that
the proper CD drivers are installed.
Note:
If you are installing RAID, install Windows Server 2003 R2 after the RAID is installed and configured.
Windows Server 2003 R2 is the operating system for IMPAX 6.3.
To install Windows Server 2003 R2
1. To boot the system, insert the Windows 2003 Server R2 disk 1 install CD into the server’s CD
drive.
2. On the Welcome screen, press Enter.
3. To accept the license agreement, press F8.
4. To create a partition, press C.
IMPAX 6.3 AS300 Installation Guide 26