Installation guide

Retrieving the IMPAX Client station name
(Topic number: 57532)
Once the appropriate Migration Tools are available on the Client station, you can use them to retrieve
the station name.
To retrieve the IMPAX Client station name
1. On the Client station, open a command prompt.
2. Change to the location of the get_station_mapping.exe file.
3. Type the following:
get_station _mapping.exe -m List -d mvf_version_number -U IMPAX_database_user -P
IMPAX_database_password
4. Type the following:
mig_reporter.exe -t get_station_mapping -d mvf_version_number -U IMPAX_database_user
-P IMPAX_database_password
A file with the IMPAX Client station name is created and is saved to C:\mvf-mig6\reports as
database_server_name_station info mapping tool_report_1_date_time.
Important!
The mig_reporter.exe command may fail when you first run it if the directory C:\mvf-mig6\reports
does not exist. If this happens, run the command again. When the command is first run, it
creates the C:\mvf-mig6\reports directory, and will run successfully after that.
Mapping an IMPAX Client station name to a machine identifier
(Topic number: 57538)
Once the IMPAX Client station name is retrieved, you can map it to a machine identifier.
To map an IMPAX Client station name to a machine identifier
1. On the Client station, open a command prompt.
2. Navigate to the location of the get_station_mapping.exe file.
3. At the prompt, type the following:
get_station_mapping.exe -m add -d mvf_version_number -U IMPAX_database_user -P
IMPAX_database_password
The mvf database is updated with the IMPAX Client station name and appropriate mappings.
During the user migration, these mappings are imported into the AD LDS database.
AS300 Preparing to Upgrade Guide—IMPAX 4.5, 5.2, 5.3,or WEB1000 to IMPAX 6.5.3 86
Agfa Company Confidential—Subject to Non-Disclosure Obligation