Installation guide

Note:
If you are logged into the server with a domain username and password that is the same as
the username and password on a remote station, error messages appear while run_psexec.bat
is executing.You can ignore these error messages.
Verifying that all IMPAX Client station names have been mapped
(Topic number: 57515)
After you have run the command to map Client station names to machine identifiers (refer to page
84), you can verify that everything worked correctly.
To verify that all IMPAX Client station names have been mapped
1.
Run the get_station_mapping.exe command.
2. Run the following command:
mig_reporter.exe -d mvf_version_number -U IMPAX_4.5_5.2_or_5.3_database_user -P
IMPAX_4.5_5.2_or_5.3_database_password -t get_station_mapping
3. Verify that no station names are listed in the report.
4.
If any station names are listed, add them to the host_list file and run the run_psexec.bat
command again.
Mapping individual Client station names
(Topic number: 6660)
Instead of mapping all Client station names at once, you can perform a set of tasks on each Client
station individually.
Installing the appropriate Migration Tools on the Client station
(Topic number: 57529)
To perform the mapping tasks right on the Client station, some of the Migration Tools are required.
To install the appropriate Migration Tools on the Client station
1. Install the impax_65_migration-winpkg-6.5.3.xxx.exe Migration Tool, as described in Installing
the IMPAX 6.5.3 Migration Toolbox (refer to page 54).
or
Copy and paste the get_station_mapping.exe and mig_reporter.exe files onto the Client, then
copy the DLL files MFC71.dll and msvcr71.dll into the Client path (such as the
Windows\system32 directory).
AS300 Preparing to Upgrade Guide—IMPAX 4.5, 5.2, 5.3,or WEB1000 to IMPAX 6.5.3 85
Agfa Company Confidential—Subject to Non-Disclosure Obligation