Installation guide

mig_reporter.exe -d mvf_version_number -U IMPAX_4.5_5.2_or_5.3_database_user -P
IMPAX_4.5_5.2_or_5.3_database_password -t user_base_summary
Viewing the report on the WEB1000 or IMPAX user base
(Topic number: 57500)
After the data is generated, you must run another command to view it.
To view the report on the WEB1000 or IMPAX user base
1.
On the Application Server, navigate to C:\mvf-mig6\reports.
2.
Using a text editor such as Notepad, open the file database_server_name_user_base_summary
_REPORT_1_date_and_time.
The report contains summary information on the number of users in the system for each
privilege type and the list of all privileges on the system.
A comparison of user privileges in IMPAX 6.5.3 and IMPAX 5.2 or 5.3 is available in the “Privilege
and permission comparison” section (topic number 54910) in the IMPAX Migrations Reference
Guide. Most of this information also applies to IMPAX 4.5.
Mapping IMPAX Client station names to machine
identifiers
(Topic number: 6661)
2.
Important!
This topic applies only to IMPAX upgrades and not to migrations from WEB1000.
Perform the following tasks to extract station names and configurations from the IMPAX 4.5, 5.2,
or 5.3 database and create a mapping of IMPAX Client machine names to the IMPAX 6.5.3 AD LDS
machine identifiers. You can perform this step for multiple Clients at once (as follows), or you can
repeat the procedure on each Client individually (refer to page 85).
Mapping multiple Client station names simultaneously
(Topic number: 6659)
To map multiple Client station names simultaneously, you have to perform a set of procedures:
• Get the list of IMPAX Client station names
• Update the host_list file
• If applicable, modify Windows XP network access settings
AS300 Preparing to Upgrade Guide—IMPAX 4.5, 5.2, 5.3,or WEB1000 to IMPAX 6.5.3 82
Agfa Company Confidential—Subject to Non-Disclosure Obligation