Installation guide

4
Preparing for
user migration
The following information outlines the steps for preparing the IMPAX 4.5, 5.2, or 5.3 and WEB1000
user data for migration to the IMPAX 6.5.3 AD LDS database.
Note:
If the IMPAX 4.5, 5.2, or 5.3 site is using LDAP user authentication, user data is typically not
migrated, so these tasks may not apply.
Collecting data on the WEB1000 or IMPAX user
base
(Topic number: 57497)
1.
Use the Migration Tools to generate a summary list of all WEB1000 and IMPAX user types on the
system. You can use this list to determine how many IMPAX 6.5.3 licenses of each type are needed.
Perform this task on the Application Server, installed as described in Installing a training server cluster
(refer to page 48).
To collect data on the WEB1000 or IMPAX user base
1.
Open a command prompt on the Application Server and navigate to C:\mvf-mig6\bin.
2. At the prompt, type
user_base_summary.exe -d mvf_version_number -U IMPAX_4.5_5.2_or_5.3_database_user
-P IMPAX_4.5_5.2_or_5.3_database_password
where version_number is 45, 52, or 53.
3. Type
AS300 Preparing to Upgrade Guide—IMPAX 4.5, 5.2, 5.3,or WEB1000 to IMPAX 6.5.3 81
Agfa Company Confidential—Subject to Non-Disclosure Obligation