Installation guide

Tip:
If it is too difficult to copy the string from the command-line interface, output the result
to a text file, then copy the string from that file.
5. Open the Study.Status.Relay.exe.config file in a text editor.
6. Under StudyStatusRelayConfiguration, between the <UserPassword> and </UserPassword>
tags, paste the long string.
For example:
...
<!--
The password to use when logging in as the UserId account. This
value is the BASE-64 encoded version of password that has been
encrypted using information specific to this machine.
Default: <none>
-->
<UserPassword>AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAABbkEiV/jjUWSVOOgdR9
RYQQAAAACAAAAAAADZgAAqAAAABAAAACiWdpGofmXAMqUZ5YsA5lkAAAAAASAAACg
AAAAEAAAAMWx8NfIDRPiPIV+727lgQgQAAAA5wKiHz2sKwU4IlvifPm02BQAAAD5u
pFcxlJes1vaYnwvF5WMJo/6lQ==</UserPassword>
...
7.
Update the values of LoginServiceUrl, StudyInfoServiceUrl, and MessagingServiceUrl with
the local Application Server’s fully qualified domain name.
8.
Update the value of RemoteSignalHost with the host name or IP address of the computer in
the previous-release version of IMPAX that is running the study-status-relay service.
9. Save and close the file.
10. In the command prompt, type
install_study_status_relay_service.bat
If a log4net error is returned, you can safely ignore this message.
To diagnose other errors or check status, consult the Study.Status.Relay.log file located in the
study-status-signal-relay folder.
If ready to use the service, proceed to the next topic, Running the Cross-Cluster Dictation Interlock
tool (refer to page 70).
Running the Cross-Cluster Dictation Interlock tool
(Topic number: 47379)
The Cross-Cluster Dictation Interlock (CCDI) tool synchronizes both the dictation status and the
claim status of studies between the previous version of IMPAX and IMPAX 6.5.3, when these are
running in parallel—such as may happen when using a training server, when using a traveling server,
or if planning to run the upgraded IMPAX cluster alongside the previous-version IMPAX cluster
for a transition period.
Synchronization of the claim status of studies occurs only between versions of IMPAX that support
shared workflows from which radiologists can then claim ownership of studies.
AS300 Preparing to Upgrade Guide—IMPAX 4.5, 5.2, 5.3,or WEB1000 to IMPAX 6.5.3 70
Agfa Company Confidential—Subject to Non-Disclosure Obligation