Installation guide

DescriptionINI_VALUEINI_KEYINI_SECTION
the IMPAX 5.2 or 5.3 Service
Tools.
a radiologist. The default
value is signal-relay.
If you change this value, you
must also configure this user in
The user name used when
changing the study status as
trainee_usersignal-relay
the IMPAX 5.2 or 5.3 Service
Tools.
a trainee radiologist. The
default value is sig-relay-train.
Copying the 6.5.3 Cross-Cluster Dictation Interlock components
(Topic number: 59189)
Perform the following task on the IMPAX 6.5.3 Application Server.
To copy the 6.5.3 Cross-Cluster Dictation Interlock components
1. Copy the study-status-signal-relay folder from the Cross-Cluster Dictation Interlock zip in the
Tools subdirectory to an appropriate folder on the 6.5.3 Application Server, such as to
C:\Program Files\Agfa\Impax Business Services.
The service will run from anywhere, but you should place it in a folder that is unlikely to be
deleted.
2. Open a command prompt and change to the directory containing the copied files.
3.
Change to the study-status-signal-relay subdirectory.
4. Type
import-study-status-relay.bat
5.
In the Apply Study Status Relay ADAM Schema dialog, click OK.
This creates a Study Status Relay role.
Configuring a firewall exception for the Cross-Cluster Dictation
Interlock tool
(Topic number: 111054)
The Windows firewall filters and blocks unsolicited incoming network traffic. To use the Cross-Cluster
Dictation Interlock tool, you must define an exception in the Windows firewall to allow the TCP
port to listen for signals coming in from the remote cluster.
To configure a firewall exception for the Cross-Cluster Dictation Interlock tool
1. On the IMPAX 6.5.3 Application Server, open Control Panel.
2.
Select Windows Firewall.
3.
Switch to the Exceptions tab.
4.
Click Add Port.
AS300 Preparing to Upgrade Guide—IMPAX 4.5, 5.2, 5.3,or WEB1000 to IMPAX 6.5.3 67
Agfa Company Confidential—Subject to Non-Disclosure Obligation