Installation guide

the new. It uses native components within IMPAX to send signals between the two systems that a
study’s dictation status has changed. During the installation and configuration, a new role and a
service called Study Status Relay are created to convey and receive the messages.
Study statuses that are synchronized are the following:
• DICTATION_STARTED
• TRAINEE_DICTATION_STARTED
• INTERPRETATION_TRANSCRIBED
• INTERPRETATION_APPROVED
• DICTATION_COMPLETED
• TRAINEE_DICTATION_COMPLETED
Cross-Cluster Dictation Interlock installation prerequisites: IMPAX
5.2 or 5.3 upgrades
(Topic number: 48079)
The Cross-Cluster Dictation Interlock components are placed on the IMPAX 6.5.3 Application
Server when the Business Services software is installed. You will find the components in the Tools
sub-directory; for example, in C:\Program Files\Agfa\Impax Business Services\Tools\Cross-Cluster
Dictation Interlock\Cross.Cluster.Dictation.Interlock_6.5.3.0.zip. You must extract the zip file. It
contains both the 5.2/5.3 and the 6.5.3 components.
Select a computer in the IMPAX 5.2 or 5.3 cluster to place the Cross-Cluster Dictation Tool
components on. It can be any computer running Windows, including a Client station, as long as
that station does not get shut down or restarted frequently.
Copying the 5.2 or 5.3 Cross-Cluster Dictation Interlock components
(Topic number: 48082)
To communicate dictation status with the IMPAX 6.5.3 system, Cross-Cluster Dictation Interlock
components must be added to a Windows-based computer in the IMPAX 5.2 or 5.3 cluster.
To copy the 5.2 or 5.3 Cross-Cluster Dictation Interlock components
1. On the 6.5.3 Application Server where the zip file was extracted, from the mvf-signal-relay
directory, copy the mvf_signal_relay.exe and install_signal_relay.bat files.
2. On the IMPAX 5.2 or 5.3 computer to run the components on, in the C:\mvf\bin directory,
paste the two files copied in the previous step.
3.
Open a command prompt and change to the C:\mvf\bin directory.
4.
Type install_signal_relay.bat remote_host_name
where remote_host_name is the host name or IP address of the Application Server that will be
running the IMPAX 6.5.3 Cluster Dictation Interlock service.
AS300 Preparing to Upgrade Guide—IMPAX 4.5, 5.2, 5.3,or WEB1000 to IMPAX 6.5.3 65
Agfa Company Confidential—Subject to Non-Disclosure Obligation