Installation guide

If the production system is not using DAA, you do not have to install these tools.
To install the PMTS package on the IMPAX production system
1. Copy the MVFdact.exe to the IMPAX system and run the file.
2.
To exit the installer, click Finish.
The PMTS installation is complete.
Setting up a connection to the 4.5, 5.2, or 5.3
database
(Topic number: 6626)
9.
To migrate IMPAX user data from the 4.5, 5.2, or 5.3 mvf database to the 6.5.3 AD LDS database
on the Application Server, you must connect the Application Server to the IMPAX 4.5, 5.2, or 5.3
Database Server.
Setting up a connection to a previous-version AS300 database
(Topic number: 6627)
Use this procedure to connect the Application Server to an IMPAX 4.5, 5.2, or 5.3 AS300 Database
Server.
To set up a connection to a previous-version AS300 database
1. To use the 32-bit version of the ODBC Data Sources tool, run
C:\Windows\SysWOW64\odbcad32.exe.
Do not select Data Sources (ODBC) through the Windows Administrative Tools as this runs
the 64-bit version of the tool.
2.
Switch to the System DSN tab.
3.
Click Add.
4.
In the Create New Data Source dialog, select SQL Server from the list. Click Finish.
5. In the Name field, type the appropriate value:
For IMPAX 4.5 upgrades, use mvf_45.
For IMPAX 5.2 upgrades, use mvf_52.
For IMPAX 5.3 upgrades, use mvf_53.
The mvf name is already being used by the temporary IMPAX 6.5.3 AS300 server.
6.
In the Description field, type mvf (lowercase).
7.
In the Server field, type or select the name of the 4.5, 5.2, or 5.3 AS300 server. Click Next.
8.
Set the authentication according to the authentication used at the site (Windows NT or SQL
Server).
AS300 Preparing to Upgrade Guide—IMPAX 4.5, 5.2, 5.3,or WEB1000 to IMPAX 6.5.3 56
Agfa Company Confidential—Subject to Non-Disclosure Obligation