Installation guide

3. Setting up one or more IMPAX Client stations, connected to this Application Server, to use
for training and configuration. For instructions, refer to the IMPAX 6.5.3 Client Installation,
Upgrade, and Configuration Guide.
Other configurations are also possible. The key is installing the Application Server software on the
station designated for that purpose, but using a temporary IMPAX 6.5.3 AS300 Database Server.
Regardless of the exact configuration, you perform all user data export and migration on the
Application Server computer.
CAUTION!
If planning to replace an existing 5.2 or 5.3 server with a new IMPAX 6.5.3 AS300 server, do
not use that actual server as part of the training server system. Data must be migrated from
the training server to the 6.5.3 production server, so each server must be separately installed.
During the upgrade weekend, worklist data is migrated from the training server system to the
production IMPAX 6.5.3 server, and the training server components are reconfigured as a dedicated
Application Server and Curator (if used). These procedures are documented in the AS300 Upgrade
and Migration Guide—IMPAX 5.2 or 5.3 to IMPAX 6.5.3.
Setting up an AS300 single-host server
(Topic number: 7104)
During the preparing to upgrade period, set up the future Curator station as a single-host AS300
Oracle station, for use within the training server cluster. Details for these installation procedures are
available in the IMPAX 6.5.3 AS300 Installation and Configuration Guide.
In a single-host configuration,Windows-based Database,Archive, and Network Gateway components
are all installed on one “box” or station. The table that follows presents the single-host installation
steps to follow. Perform these tasks in the order listed.
AS300 Preparing to Upgrade Guide—IMPAX 4.5, 5.2, 5.3,or WEB1000 to IMPAX 6.5.3 49
Agfa Company Confidential—Subject to Non-Disclosure Obligation