Installation guide

Obtaining Server licenses for Windows stations
(Topic number: 10699)
To obtain new license keys, if this is required, email [e-mail]. To generate the license
keys, Agfa must know the Ethernet MAC (Media Access Control) address of the server.
To obtain Server licenses for Windows stations
1.
For each Windows server, open a command prompt and type ipconfig /all.
The MAC address of all Ethernet cards installed on the station are listed. You can use any of
these to generate the license from.
2. Copy one of the returned MAC addresses to a secure place.
Ensure that you copy down the address exactly as it appears, including leading zeroes.
The MAC addresses contain only the alphanumeric characters 0-9 and A-F.
3. To obtain a license key for the server, send the MAC address information to
[e-mail], along with the type of component being installed on that server.
Installing IMPAX 6.5.3 on new servers
(Topic number: 6667)
3.
If replacing the existing IMPAX servers with new servers or adding additional servers to the cluster
as part of the upgrade, and for WEB1000-only sites that must use new servers, install the appropriate
external and IMPAX 6.5.3 software on the new single-host, Database Server, Archive Server, or
Network Gateway during the preparing to upgrade period.
Do not install dedicated Curator stations at this time. One Curator station is reserved for use as a
training server during the preparing to upgrade period. It will be converted to a dedicated Curator
during the upgrade period, at which point any other Curator stations can be installed as well.
For details on how to install and initially configure a single-host, Database Server, Archive Server,
or Network Gateway, refer to the IMPAX 6.5.3 AS300 Installation and Configuration Guide.
Note:
Since all IMPAX 6.5.3 AS300 servers must be installed under Windows Server 2008 R2 SP1,
all AS300 upgrades to IMPAX 6.5.3 require forklift upgrades to new or restaged hardware.
For details on installing Windows Server 2008 R2 SP1, refer to the IMPAX 6.5.3 AS300
Installation and Configuration Guide.
If performing a forklift upgrade of an Oracle Database Server, ensure that you install the same Oracle
edition as the existing production system or else the database migration will fail. For example, if the
database on the production system is Oracle Standard Edition, install Oracle Standard Edition when
staging the new system. Or, if the database on the production system is Oracle Enterprise Edition,
install Oracle Enterprise Edition when staging the new system.
AS300 Preparing to Upgrade Guide—IMPAX 4.5, 5.2, 5.3,or WEB1000 to IMPAX 6.5.3 41
Agfa Company Confidential—Subject to Non-Disclosure Obligation