Installation guide

Default valueValuesParameters
add
{list | add}-m
MigrateTRServer.exe
(Topic number: 10617)
Utility that migrates worklist or report data or both from the training or traveling server to the
production server. This is not a command-line utility; it has a user interface.
When using the MigrateTRSserver utility to migrate Connectivity Manager report data from the
IMPAX 5.2 or 5.3 traveling server to the production server, ensure the following:
• Before migrating reports between IMPAX servers, stop the appropriate Connectivity Manager
RIS inbound interfaces or outbound report queues to IMPAX.
• Connectivity Manager should be configured to use the migrated IMPAX 6.5.3 server name
when the queues are stopped. Any reports in Connectivity Manager report queues fail to store
to IMPAX 6.5.3 if they are in the queue with the incorrect server name.
• Do not send live reports into the IMPAX 6.5.3 production system until the report migration
from the traveling server to the production server is complete. This utility overwrites all reports.
• This utility requires .NET in order to run. Run the utility from the IMPAX 6.5.3 Application
Server, where .NET is installed.
mig_reporter.exe
(Topic number: 10619)
Generates a progress report of long-running tasks as well as the final report output from each tool
to a file or directly to the screen. This is an optional helper utility.
Default valueValuesParameters
None
host_name-h
None
Migration_Tool_name-t
None
information_type-r
Not applicableNone; deletes prior entries
-p
Not applicableNone; verbose mode
-v
Not applicableNone; output to screen instead of to reports
directory
-c
Example:
mig_reporter.exe -d mvf_52 -t system_inventory_tool
This command writes the output of the system inventory command to a report file.
AS300 Preparing to Upgrade Guide—IMPAX 4.5, 5.2, 5.3,or WEB1000 to IMPAX 6.5.3 113
Agfa Company Confidential—Subject to Non-Disclosure Obligation