Installation guide

1
Summary of IMPAX
AS300 Server
configuration steps
The following provides an overview of all steps required to configure an IMPAX AS300 Server. Details
are provided in subsequent chapters.
Configuring IMPAX on an AS300 single-host server
To configure the single-host server, perform the tasks listed in the table that follows. For more complete
instructions, refer to Configuring an AS300 single-host Server or dedicated Database Server (refer to
page 9)
Action
Perform the initial database backup (refer to page 9)
If required, configure database backup times (refer to page 10)
Configure SQL Server character support (refer to page 11)
Set up image and web caches (refer to page 14)
Configure PACS Store and Remember archiving (refer to page 22), if using this type of
archiving
Configure an HSM archive (refer to page 28), if using this type of archiving
Move the DVD-R archive VOLUMES partition (refer to page 28), if applicable
If you have installed the Scavenger package, install and start the Scavenger service (refer
to page 9)
Change the default log file location (refer to page 30)
Change the Administration Tools log file locations (refer to page 17)
Create IPSEC filters to allow access to specified hosts (refer to page 31)
IMPAX 6.3 AS300 Configuration Guide 6