Installation guide

OptionsScreenWizard
IP Filter ListSecurity Rule
Wizard
1. Click OK.
IP Filter ListSecurity Rule
Wizard
1. Select the filter you just created.
Example: Domain Controller Filter List
2. Click Next.
Filter ActionSecurity Rule
Wizard
1. Select Impax Permit Action.
Installing and configuring Curator
If you installed Curator on an AS300 single-host server, Archive Server, or Network Gateway machine,
configure Curator after installing the Application Server and performing its initial configuration. Refer
to "Configuring Curator INI settings" in Chapter 2 of the IMPAX 6.3 AS300 Configuration Guide.
If you are installing Curator on a separate machine, or on multiple machines in a master-slave
configuration, do this after installing the Application Server and performing its initial configuration,
as well as after configuring all the other IMPAX Server components. Refer to the IMPAX 6.3 Curator
and CD Export Server Installation Guide.
IMPAX 6.3 AS300 Configuration Guide 33