Installation guide

• The electrical installation of the site in which the equipment is used is according to an applicable

safety standard (UL, CSA, or IEC/CDE).

• The equipment is used according to the instructions provided in the operation manuals.

Additional documentation

This guide is intended for service and administrative personnel who are installing or upgrading,

configuring, and maintaining the server components of the IMPAX 6.3 system.

For information about using the IMPAX software once it is installed, refer to the IMPAX 6.3 Server

Knowledge Base, IMPAX 6.3 Application Server Knowledge Base, and IMPAX 6.3 Client Knowledge Base.

These Knowledge Bases are installed on the Application Server. Refer to Installing the IMPAX

documentation in Chapter 3 of the IMPAX 6.3 Application Server Installation and Upgrade Guide.

To open the IMPAX 6.3 Server Knowledge Base

1. Ensure that the IMPAX documentation has been installed, and that you know the name of the

Application Server it is installed on.

2. In a browser, navigate to:

https://<app_server_name>/impax/documents/server/default.htm

To open the IMPAX 6.3 Application Server Knowledge Base

1. Ensure that the IMPAX documentation has been installed.

2. On the Application Server, double-click the IMPAX 6.3 Application Server Knowledge Base

desktop shortcut.

From a browser on a connected computer, navigate to

https://<app_server_name>/impax/documents/appserver/default.htm

To open the IMPAX 6.3 Client Knowledge Base

1. Ensure that the IMPAX documentation has been installed.

2. Launch the IMPAX Client application and log in.

3. Press F1.

IMPAX 6.3 AS300 Configuration Guide 3