Installation guide

PACS Store and Remember Archiving is also known as PACS Archiving.
To set up PACS Store and Remember archiving
1. Obtain and install (refer to page 23) an archive license key on the PACS Store and Remember
archive server.
2. Add the PACS Store and Remember archive in Network Management (refer to page 23).
3. Register the PACS Store and Remember archive services (refer to page 24).
4. Test the PACS Store and Remember archive functionality (refer to page 24).
Installing the archive license key
Ensure that you have obtained the archive license key for the server from Agfa.
Using PACS Store and Remember archiving (or any other type of archiving) requires an archive license
key. If you have not already installed on the server, do so now.
To install the archive license key
1. Match up the correct license key with the server's MAC address.
The license key name is the MAC address with a .lic file extension.
2. Select Start > All Programs > Accessories > Windows Explorer.
3. Copy the archive license key to the C:\mvf directory on the hard drive.
4. Rename the license key to mvfarch.lic.
Setting up the PACS Store and Remember archive in the Administration
Tools
To configure an external PACS archive as a PACS Store and Remember archive, set up the external
PACS archive in Network Management in the IMPAX Administration Tools.
Note:
If you are using different AE titles on the external PACS archive for store jobs and retrieve jobs, steps
3 to 11 must be followed twice: once for the store AE title, and once for the retrieve AE title.
To add a Store and Remember archive in Network Management
1. Launch and log into the Administration Tools.
2. On the Setup tab, click Network Management.
3. To set up a new destination, click New.
4. In the AE Title field, type the AE title of the external PACS archive.
5. In the Alias field, type an alias for the archive.
IMPAX 6.3 AS300 Configuration Guide 23