Installation guide

Description of possible valuesDefault
value
ini_key
T—Collect performance metrics on prepare jobs and store
them in map_job_metrics table.
TCOLLECT_PERFORMANCE_
METRICS
F—Do not collect performance metrics.
The following metrics are recorded in the map_job_metrics
table:
• SERVICE_REF—Service ref of the curator process that
handled the prepare job.
• NUM_OBJECTS—Number of objects in the study being
curated.
• STAT1—Number of frames that were curated.
• STAT2—Input size of study in MB.
• STAT3—Raw size of study in MB.
• STAT4—Amount of data written to web cache in MB.
T—Duplicate PREPARE jobs are deleted.TDELETE_DUPLICATE_JOBS
F—Duplicate PREPARE jobs are allowed.
Minimum amount of free memory, in MB, that Curator
requires. If the amount of free memory falls below this number,
300MIN_MEM_FREE
Curator restarts. To have Curator ignore this, set the
MIN_MEM_FREE to -1.
If you change this from the default, select a value that is at
least 6 times the uncompressed size of the largest image you
intend to curate.
T—The Q Factor is reused between compatible images/frames
within the series.
FQFACTOR_REUSE
F—The Wavelet Q Factor defined in the Web Compression
Manager is ignored and the Q Factor is not reused.
We do not recommend changing this setting to T (True).
T—Send STUDY-SIMPLIFIED MAP signal to the Client.TSEND_SIGNALS
F—Do not send the signal to the Client.
IMPAX 6.3 AS300 Configuration Guide 21