Installation guide

OptionsScreenWizard
Example: Open access to the domain controller
3. Ensure that Use Add Wizard is enabled.
4. Click Add.
The IP Filter Wizard is launched.
IP Filter Description and
Mirrored property
IP Filter Wizard 1. Add an appropriate description.
Example: Open Access to the Domain Controller
2. Enable Mirrored.
IP Traffic SourceIP Filter Wizard 1. From the Source address list, select My IP
Address.
IP Traffic DestinationIP Filter Wizard 1. From the Destination address list, select one of:
• A specific DNS Name—If the hostname is
known.
• A specific IP Address—If the IP address is
known.
2. Type the fully qualified hostname or IP address.
3. If you typed a hostname and received a security
warning about creating a filter using the
hostname, review the content of the message for
correctness and then, to create the filter, click Yes.
IP Protocol TypeIP Filter Wizard 1. From the Select a protocol type list, accept the
default selection for Any.
CompletingIP Filter Wizard 1. Click Finish.
IP Filter ListSecurity Rule
Wizard
1. Click OK.
IP Filter ListSecurity Rule
Wizard
1. Select the filter you just created.
Example: Domain Controller Filter List
2. Click Next.
Filter ActionSecurity Rule
Wizard
1. Select Impax Permit Action.
Configuring Curator INI settings
If you are installing Curator on a separate machine, or on multiple machines in a master-slave
configuration, you should do this after configuring all the IMPAX Server components. For installation
details, refer to the IMPAX 6.3 Curator and CD Export Server Installation Guide.
IMPAX 6.3 AS300 Configuration Guide 19